mdsstat

Description

This command shows the status of specific processes on the Multi-Domain Server and Domain Management Servers.

Syntax

mdsstat [-h] [-m] [<Name or IP Address of Domain Management Server>]

Parameters

Parameter	Description
`-h`	Displays help message.
`-m`	Test status for Multi-Domain Server only.
`<Name or IP address of Domain Management Server>`	Specifies the Domain Management Server by its name or IPv4 address.

Possible Statuses of Processes

Status	Description
`up`	The process is up.
`down`	The process is down.
`pnd`	The process is pending initialization.
`init`	The process is initializing.
`N/A`	The process's PID is not yet available.
`N/R`	The process is not relevant for this Multi-Domain Server.

Example

[Expert@MDS:0]# mdsstat
+--------------------------------------------------------------------------------------+
|                              Processes status checking                               |
+-----+----------------+-----------------+------------+----------+----------+----------+
| Type| Name           | IP address      | FWM        | FWD      | CPD      | CPCA     |
+-----+----------------+-----------------+------------+----------+----------+----------+
| MDS |        -       | 192.168.3.101   | up 17284   | up 17266 | up 17251 | up 17753 |
+-----+----------------+-----------------+------------+----------+----------+----------+
| CMA |DOM211_Server   | 192.168.3.211   | up 32227   | up 32212 | up 25725 | up 32482 |
| CMA |DOM212_Server   | 192.168.3.212   | up 4248    | up 4184  | up 4094  | up 4441  |
+-----+----------------+-----------------+------------+----------+----------+----------+
| Total Domain Management Servers checked: 2     2 up   0 down                         |
| Tip: Run mdsstat -h for legend                                                       |
+--------------------------------------------------------------------------------------+
[Expert@MDS:0]#