ips bypass

Description

Controls the IPS Bypass mode:

  • When CPU and/or Memory utilization reaches the configured higher threshold, IPS Software Blade disables itself.

  • When CPU and/or Memory utilization goes down to the configured lower threshold, IPS Software Blade enables itself.

Syntax

ips bypass

      off

      on

      set <options>

      stat

Parameters

Parameter

Description

No Parameters

Shows the applicable built-in usage.

off

Disables the IPS Bypass mode.

on

Enables the IPS Bypass mode.

set <options>

Configures the utilization thresholds (in per cent), at which to engage (higher threshold) or disengage (lower threshold) the IPS Bypass mode.

The available options are:

  • Configure the lower CPU threshold:

    ips bypass set cpu low <0-100>

  • Configure the higher CPU threshold:

    ips bypass set cpu high <0-100>

  • Configure the lower Memory threshold:

    ips bypass set mem low <0-100>

  • Configure the higher Memory threshold:

    ips bypass set mem high <0-100>

Example:

ips bypass set cpu low 80

stat

Shows the status of the IPS Bypass Under Load:

  • IPS bypass mode

  • CPU thresholds

  • Memory thresholds