adlog

Description

Provides commands to control and monitor the AD Query process.

Syntax

When the adlog runs on a Security Gateway, the AD Query serves the Identity Awareness Software Blade, which enforces policy and logs identities.

In this case, the command syntax is:

adlog a <parameter> [<option>]

When the adlog runs on a Log Server, it logs identities.

In this case, the command syntax is:

adlog l <parameter> [<option>]

Note - Parameters for the "adlog a" and "adlog l" commands are identical.

Parameters

Parameter	Description
No Parameters	Displays available options for this command and exits.
`a` or `l`	Sets the working mode: `adlog a`- If you use the AD Query for Identity Awareness. `adlog l` - If you use a Log Server (Identity Logging).
`control <parameter> <option>`	Sends control commands to the AD Query. See adlog control.
`dc`	Shows the status of a connection to the AD domain controller. See adlog dc.
`debug <parameter>`	Enables and disables the `adlog` debug output. See adlog debug.
`query <parameter> <option>`	Shows the database of identities acquired by the AD Query, according to the specified filter. See adlog query.
`statistics`	Shows statistics about NT Event logs received by `adlog`, for each IP address and total. Also shows the number of identified IP addresses. See adlog statistics.