fw -i

Description

By default, the fw commands apply to the entire Security Gateway.

The fw commands show aggregated information for all CoreXL Firewall instances.

The fw -i commands apply to the specified CoreXL Firewall instance.

Syntax

fw -i <ID of CoreXL Firewall instance> <Command>

Parameters

Parameter	Description
`<ID of CoreXL Firewall instance>`	Specifies the ID of the CoreXL Firewall instance. To see the available IDs, run the fw ctl multik stat command.
`<Command>`	Only these commands support the `fw -i` syntax: `fw -i <ID> conntab ...` `fw -i <ID> ctl get ...` `fw -i <ID> ctl leak ...` `fw -i <ID> ctl pstat ...` `fw -i <ID> ctl set ...` `fw -i <ID> monitor ...` `fw -i <ID> tab ...` For details and additional parameters for any of these commands, refer to the corresponding entry for each command.

Parameter

Description

<ID of CoreXL Firewall instance>

Specifies the ID of the CoreXL Firewall instance.

To see the available IDs, run the fw ctl multik stat command.

<Command>

Only these commands support the fw -i syntax:

For details and additional parameters for any of these commands, refer to the corresponding entry for each command.

Example 1 - Show the Connections table for CoreXL Firewall instance #1

fw -i 1 tab -t connections

Example 2 - Show various internal statistics for CoreXL Firewall instance #1

fw -i 1 ctl pstat