fw ctl conn

Description

Shows the list of Firewall Connection Modules.

This list shows various inspection Connection Modules, through which the traffic passes on this Security Gateway.

The available Connection Modules depend on the configuration and enabled Software Blades.

Important - In Cluster, outputs of this command must be the same on all the Cluster Members.

Syntax

fw [-d] ctl conn

Parameters

Parameter

Description

-d

Runs the command in debug mode.

Use only if you troubleshoot the command itself.

Best Practice - If you use this parameter, then redirect the output to a file, or use the script command to save the entire CLI session.

Example

[Expert@MyGW:0]# fw ctl conn

Registered connections modules:

No. Name             Newconn          Packet           End              Reload           Dup Type Dup Handler

Connectivity level 0:

1:  Accounting       1:  Accounting       0000000000000000 0000000000000000 FFFFFFFF8B8395A0 0000000000000000 Special  FFFFFFFF8B831720

2:  Authentication   2:  Authentication   FFFFFFFF8B3150A0 0000000000000000 0000000000000000 0000000000000000 Special  FFFFFFFF8B34FCC0

8:  NAT              8:  NAT              0000000000000000 0000000000000000 FFFFFFFF8B6D1AF0 0000000000000000 Special  FFFFFFFF8B6B8410

9:  RTM              9:  RTM              0000000000000000 0000000000000000 0000000000000000 0000000000000000 None

10:  RTM2             10:  RTM2             0000000000000000 0000000000000000 FFFFFFFF8B014970 0000000000000000 None

11:  SPII             11:  SPII             FFFFFFFF8B412060 0000000000000000 FFFFFFFF8B41AF40 FFFFFFFF8B4016A0 None

13:  VPN              13:  VPN              FFFFFFFF8A965440 0000000000000000 FFFFFFFF8AA4CC40 0000000000000000 Special  FFFFFFFF8AA60490

Connectivity level 1:

13:  VPN              13:  VPN              0000000000000000 0000000000000000 0000000000000000 0000000000000000 None

[Expert@MyGW:0]#