Maintenance Mode for SmartLSM Security Gateways

Enable Maintenance Mode on a Security Gateway when you test changes to its object configuration or Provisioning Profile. In this mode, changes are pushed from the SmartProvisioning console to the Security Management Server or Domain Management Server, but they are not pushed to the gateway.

A SmartLSM Security Gateway on your SmartProvisioning management has operational issues. The SmartLSM Security Gateway is in a remote office which is too far away for you to manage yourself, so you ask the local system administrator to handle the issue.

However, you do not want the gateway to lose the configurations that you already made to it from your central SmartProvisioning console. Therefore, enable Maintenance Mode on this gateway.

The local administrator fixes the issue. You disable Maintenance Mode, which switches the SmartLSM Security Gateway back to centralized configuration through the SmartProvisioning console.

Note - When you disable Maintenance Mode, the central SmartProvisioning configurations override any local changes. If the local administrator discovers that changes need to be made on this gateway, make sure you have the data before you switch back.

To enable Maintenance Mode:

Right-click a Security Gateway, and select Actions > Turn on maintenance mode.

Notes:

  • Changes to the Provisioning Profile do not affect the gateway as long as Maintenance Mode is on.

  • If you turn off Maintenance Mode, all local changes are overridden by central configurations.