Step 2 - Configuring Gaia Settings of a Security Group

This section provides instructions for configuring Gaia settings of a Security Group.

Watch the Demonstration Video

Step

Instructions

1

With a web browser, connect to the Gaia Portal of the Security Group:

https://<IP Address of Security Group>

Important - This connection goes through the Quantum Maestro Orchestrator's management interface you assigned to this Security Group.

2

Log in with these default credentials:

  • Username - admin

  • Password - admin

3

Change the default Gaia password to a new password:

  1. From the left tree, click User Management > Users.

  2. Select the admin user.

  3. Click Reset Password.

  4. Enter the new password.

  5. Click OK.

4

From the left tree, click Network Management > Network Interfaces.

5

Configure the applicable settings (for example, create a Bond or a VLAN interface) and IP addresses for the Uplink ports.

Important - In VSX mode, you must configure all IP addresses in SmartConsole only.

6

Configure other applicable Gaia settings.

For example: Time Zone, DNS servers, Proxy server, Static Routes.

For more information, see the R81.20 Gaia Administration Guide.

Note - The commands you run in the Gaia gClish apply to all Security Appliances in this Security Group.

Step

Instructions

1

Connect to the command line of the Security Group over SSH at <IP Address of Security Group>.

When you log in, the Gaia gClish opens by default.

Important - This connection goes through the Quantum Maestro Orchestrator's management interface you assigned to this Security Group.

2

Log in with these default credentials:

  • Username - admin

  • Password - admin

3

Change the default Gaia password to a new password:

set user admin password

4

Configure the applicable settings (for example, create a Bond or a VLAN interface) and IP addresses for the Uplink ports.

Important - In VSX mode, you must configure all IP addresses in SmartConsole only.

5

Configure other applicable Gaia settings.

For example: Time Zone, DNS servers, Proxy server, Static Routes.

For more information, see: