pep control

Description

Provides commands to control the PEPClosed Check Point Identity Awareness Security Gateway that acts as Policy Enforcement Point: receives identities via identity sharing; redirects users to Captive Portal..

Syntax

pep control

      extended_info_storage <options>

      identity_cache_mode <options>

      portal_dual_stack <options>

      tasks_manager status <options>

Important:

Parameters

Parameter

Description

extended_info_storage <options>

Controls whether PEP stores the extended identities information for debug.

The available <options> are:

  • disable - PEP does not store the information.

  • enable - PEP stores the information.

identity_cache_mode <option>

Important:

Configures the Identity Cache Mode for the PDPClosed Check Point Identity Awareness Security Gateway that acts as Policy Decision Point: acquires identities from identity sources; shares identities with other gateways.-to-PEP sharing protocol.

The available <options> are:

  • Show the current status:

    pep control identity_cache_mode status

  • Enable the Identity Cache Mode:

    pep control identity_cache_mode enable

  • Disable the Identity Cache Mode (this is the default):

    pep control identity_cache_mode disable

portal_dual_stack <options>

Controls the support for portal dual stack (IPv4 and IPv6).

The available <options> are:

  • disable - Disables the support.

  • enable - Enables the support.

tasks_manager <options>

Shows the status of the PEP tasks (current running, previous, and pending tasks).

The available <options> are:

  • status - Shows the status.