Gaia Management Interface

This section shows you how to select the GaiaClosed Check Point security operating system that combines the strengths of both SecurePlatform and IPSO operating systems. Management InterfaceClosed (1) Interface on a Gaia Security Gateway or Cluster member, through which Management Server connects to the Security Gateway or Cluster member. (2) Interface on Gaia computer, through which users connect to Gaia Portal or CLI..

This is the main interface, through which you connect to Gaia Operating System.

Note - You selected this interfaces during the Gaia First Time Configuration Wizard.

Selecting Management Interface in Gaia Portal

Important - On Scalable Platforms (Maestro and Chassis), you must connect to the Gaia PortalClosed Web interface for the Check Point Gaia operating system. of the applicable Security Group.

Step

Instructions

1

In the navigation tree, click Network Management > Network Interfaces.

2

In the section Management Interface, click Set Management Interface.

You can see the name of the current Management Interface above this button.

3

In the Management Interface field, select an interface.

4

Click OK.

Selecting Management Interface in Gaia Clish

Important - On Scalable Platforms, you must run the applicable commands in Gaia gClish of the applicable Security Group.

Syntax

show management interface

set management interface <Name of Interface>

Important - After you add, configure, or delete features, run the "save config" command to save the settings permanently.

Parameters

Parameter

Description

<Name of Interface>

Specifies the name of the interface, on which to create an alias IPv4 address

gaia> show management interface

gaia> set management interface eth2