fwaccel tab
説明
fwaccel tab およびfwaccel6 tab コマンドは、指定された SecureXL セキュリティゲートウェイを通過するIPv4およびIPv6トラフィックを高速化するセキュリティゲートウェイ上のCheck Point製品。 カーネル・テーブルの内容を表示します。
|
注:
|
IPv4用構文
|
|
IPv6用構文
|
|
パラメータ
パラメータ |
説明 |
---|---|
パラメータなし |
該当する内蔵の使用状況を表示します。 |
|
出力をフォーマットする。 常にこのパラメータを使用することをお勧めします。 |
|
カーネルテーブルから何行表示するかを指定します。 注:コマンドはテーブルの先頭から数えます。 デフォルト1000 |
|
サマリー情報のみを表示します。 |
|
カーネルテーブルを指定する。 このコマンドは、これらのカーネル・テーブルのみをサポートします。
|

[Expert@MyGW:0]# fwaccel tab -f -m 200 -t connections Table connections is empty [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t inbound_SAs Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t outbound_SAs Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t vpn_link_selection Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t drop_templates Table drop_templates is empty [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t vpn_trusted_ifs Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t profile Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t mcast_drop_conns Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t invalid_replay_counter Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t ipsec_mtu_icmp Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t gtp_tunnels Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t gtp_apns Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t if_by_name Table contents written to /var/log/messages. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t PMTU_table Table PMTU_table is empty [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t frag_table Table frag_table is empty [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t reset_table Table reset_table is empty [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t dos_ip_blacklists Table dos_ip_blacklists is not active for SecureXL device 0. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t dos_pbox Table dos_pbox is not active for SecureXL device 0. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t dos_rate_matches Table dos_rate_matches is not active for SecureXL device 0. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t dos_rate_track_src Table dos_rate_track_src is not active for SecureXL device 0. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t dos_rate_track_src_svc Table dos_rate_track_src_svc is not active for SecureXL device 0. [Expert@MyGW:0]# |
[Expert@MyGW:0]# fwaccel tab -t dos_pbox_violating_ips Table dos_pbox_violating_ips is not active for SecureXL device 0. [Expert@MyGW:0]# |