vsx_util change_private_net
Description
Changes the IP address of the Internal Communication Network in a VSX Virtual System Extension. Check Point virtual networking solution, hosted on a computer or cluster with virtual abstractions of Check Point Security Gateways and other network devices. These Virtual Devices provide the same functionality as their physical counterparts. Cluster Two or more Security Gateways that work together in a redundant configuration - High Availability, or Load Sharing. (cluster private network).
Syntax
|
Required Input
-
The applicable VSX Cluster object.
-
New IPv4 address for the cluster private network.
-
New IPv4 netmask for the cluster private network.
-
New IPv6 address and prefix for the cluster private network.
Comments
-
Run the command and follow the instructions on the screen.
-
The IP address of the Internal Communication Network must be unique.
This IP address must not be used anywhere in your environment, including the Virtual Devices on this VSX Cluster.
-
The illegal IPv4 addresses are:
0.0.0.0
,127.0.0.0
, and255.255.255.255
-
For IPv4 address, the network mask must be one of these:
-
255.255.0.0
, or/16
-
255.255.128.0
, or/17
-
255.255.192.0
, or/18
-
255.255.224.0
, or/19
-
255.255.240.0
, or/20
-
255.255.248.0
, or/21
-
255.255.252.0
, or/22
(this is the default)
-
-
For IPv6 address, the new prefix must be
/80
.