cp_conf

Description

Configures or reconfigures a Check Point product installation.

Note - The available options for each Check Point computer depend on the configuration and installed products.

Syntax on a Management Server

cp_conf

      -h

      admin <options>

      auto <options>

      ca <options>

      client <options>

      finger <options>

      lic <options>

      snmp <options>

Syntax on a Security Gateway / each Cluster Member in Gaia Clish or the Expert mode

cp_conf

      -h

      adv_routing <options>

      auto <options>

      corexl <options>

      fullha <options>

      ha <options>

      intfs <options>

      lic <options>

      sic <options>

      snmp <options>

Syntax on a Scalable Platform Security Group in Gaia gClish

cp_conf

      -h

      adv_routing <options>

      auto <options>

      corexl <options>

      fullha <options>

      ha <options>

      intfs <options>

      lic <options>

      sic <options>

      snmp <options>

Syntax on a Scalable Platform Security Group in the Expert mode

g_all cp_conf

      -h

      adv_routing <options>

      auto <options>

      corexl <options>

      fullha <options>

      ha <options>

      intfs <options>

      lic <options>

      sic <options>

      snmp <options>

Parameters

Parameter

Description

-h

Shows the entire built-in usage.

admin <options>

Configures Check Point system administrators for the Security Management ServerClosed Dedicated Check Point server that runs Check Point software to manage the objects and policies in a Check Point environment within a single management Domain. Synonym: Single-Domain Security Management Server..

See cp_conf admin.

adv_routing <options>

Enables or disables the Advanced Routing feature on this Security GatewayClosed Dedicated Check Point server that runs Check Point software to inspect traffic and enforce Security Policies for connected network resources..

Important - Do not use these outdated commands. To configure Advanced Routing, see the R81.10 Gaia Advanced Routing Administration Guide.

auto <options>

Shows and configures the automatic start of Check Point products during boot.

See cp_conf auto.

ca <options>

See cp_conf ca.

client <options>

Configures the GUI clients that can use SmartConsoleClosed Check Point GUI application used to manage a Check Point environment - configure Security Policies, configure devices, monitor products and events, install updates, and so on. to connect to the Security Management ServerClosed Check Point Single-Domain Security Management Server or a Multi-Domain Security Management Server..

See cp_conf client.

corexl <options>

Enables or disables CoreXLClosed Performance-enhancing technology for Security Gateways on multi-core processing platforms. Multiple Check Point Firewall instances are running in parallel on multiple CPU cores. on this Security Gateway / Cluster MemberClosed Security Gateway that is part of a cluster. / Security Group.

See cp_conf corexl.

finger <options>

Shows the ICA's Fingerprint.

See cp_conf finger.

fullha <options>

Manages Full High AvailabilityClosed A special Cluster Mode supported only on Check Point appliances running Gaia OS (R75.40 and higher) or SecurePlatform OS (R77.30 and lower), where each Cluster Member also runs as a Security Management Server. This provides redundancy both between Security Gateways (only High Availability is supported) and between Security Management Servers (only High Availability is supported). Synonyms: Full HA Cluster Mode, Full HA, FullHA. ClusterClosed Two or more Security Gateways that work together in a redundant configuration - High Availability, or Load Sharing..

See cp_conf fullha.

Note - This command does not apply to Scalable Platforms (Maestro and Chassis).

ha <options>

Enables or disables cluster membership on this Security Gateway / Cluster Member.

See cp_conf ha.

Note - This command does not apply to Scalable Platforms (Maestro and Chassis).

intfs <options>

Sets the topology of interfaces on a Security Gateway / Cluster Member, which you manage with SmartProvisioningClosed Check Point Software Blade on a Management Server (the actual name is "Provisioning") that manages large-scale deployments of Check Point Security Gateways using configuration profiles. Synonyms: Large-Scale Management, SmartLSM, LSM..

See cp_conf intfs.

Note - This command does not apply to Scalable Platforms (Maestro and Chassis).

lic <options>

Manages Check Point licenses.

See cp_conf lic.

sic <options>

Manages SICClosed Secure Internal Communication. The Check Point proprietary mechanism with which Check Point computers that run Check Point software authenticate each other over SSL, for secure communication. This authentication is based on the certificates issued by the ICA on a Check Point Management Server. on this Security Gateway / Cluster Member / Security Group.

See cp_conf sic.

snmp <options>

Do not use these outdated commands.

To configure SNMP, see the R81.10 Gaia Administration Guide - Chapter System Management - Section SNMP.