fw ctl multik show_bypass_ports

Description

Shows the TCP and UDP ports configured in the bypass port list of the CoreXL Dynamic Dispatcher with the g_fw ctl multik add_bypass_port command.

For more information about the CoreXL Dynamic Dispatcher, see sk105261.

Important - This command reads the configuration from the $FWDIR/conf/dispatcher_bypass.conf file. You must not edit this file manually.

Notes:

• In Gaia gClish, run the fw ctl multik ... command.
• In Expert mode, run the g_fw ctl multik ... command.

Syntax

fw ctl multik show_bypass_ports

Example

[Expert@MyGW:0]# g_fw ctl multik show_bypass_ports dynamic dispatcher bypass port list: (9999,8888) [Expert@MyGW:0]#