vsx fetch

Description

Fetches the most current configuration files from the Security Management Server or Main Domain Management Server, and applies it to the VSX Gateway.

Syntax

vsx fetch [-v] [-q] [-s] local

vsx fetch [-v | -q | -s] [-f <conf_file>]

vsx fetch [-v | -q] -C "command"

vsx fetch [-v | -q | -c | -n | -s] [<Management Server>]

Parameters

Parameter	Description
-c	Specifies that this is a VSX Cluster.
-n	Specifies not to apply the `local.vsall`, if VSX configuration, as fetched from Management Server, is up-to-date.
-q	Specifies to run in quiet mode - shows only summary information.
-s	Specifies to fetch concurrently for multi-processor environment.
-v	Specifies to run in verbose mode - shows detailed information.
local	Reads the `$FWDIR/state/local/VSX/local.vsall` configuration file and executes the Network Configuration Script (NCS).
-f <conf_file>	Fetches the specified configuration with NCS commands file instead of the default `local.vsall` file.
-C "command"	Executes the specified NCS command.
`<`Management Server`>`	Fetches the `local.vsall` from the specified Management Server (by resolvable hostname, or IP address), replaces and runs it. Note - If you do not specify the Management Server explicitly, the command takes it from the `$FWDIR/conf/masters` file on the VSX Gateway.

Return Values

Example

# vsx fetch

Fetching VSX Configuration From: 10.18.99.101

Local VSX Configuration is Up-To-Date.

Cleaning un-used Virtual Systems entries (local.vskeep).

Purge operation succeeded.

Fetching Virtual Systems configuration file (local.vsall).

SecureXL device has been enabled for vsid 1

SecureXL device has been enabled for vsid 2

SecureXL device has been enabled for vsid 3

Virtual Systems configuration file installed successfully