|
|
|
Description
This command starts the Check Point Configuration Tool. This tool lets you configure specific settings for the installed Check Point products.
Important - In cluster, you must configure all the Cluster Members in the same way.
Syntax
cpconfig |
Menu Options
Note - The options shown depend on the configuration and installed products.
Menu Option |
Description |
|---|---|
Licenses and contracts |
Manages Check Point licenses and contracts. |
SNMP Extension |
Do not use this option anymore. To configure SNMP, see the R80.30 Gaia Administration Guide - Chapter System Management - Section SNMP. |
PKCS#11 Token |
Register a cryptographic token, for use by Gaia OS. See details of the token, and test its functionality. |
Random Pool |
Configures the RSA keys, to be used by Gaia OS. |
Secure Internal Communication |
Manages SIC on the Security Gateway. This change requires a restart of Check Point services on the Security Gateway. For more information, see the R80.30 Security Management Administration Guide. |
Enable cluster membership for this gateway |
Enables and disables the cluster membership on the Security Gateway. This change requires a reboot of the Security Gateway. |
Disable cluster membership for this gateway |
For more information, see the R80.30 Installation and Upgrade Guide and R80.30 ClusterXL Administration Guide. |
Check Point CoreXL |
Manages CoreXL on the Security Gateway. After all changes in CoreXL configuration, you must reboot the Security Gateway. For more information, see the R80.30 Performance Tuning Administration Guide. |
Enable Check Point ClusterXL for Bridge Active/Standby |
Enables and disables Check Point ClusterXL for Bridge mode. This change requires a reboot of the Security Gateway. |
Disable Check Point ClusterXL for Bridge Active/Standby |
For more information, see the R80.30 Installation and Upgrade Guide and R80.30 ClusterXL Administration Guide. |
Automatic start of Check Point Products |
Shows and controls which of the installed Check Point products start automatically during boot. |
Exit |
Exits from the Check Point Configuration Tool. |
Example 1 - Menu on a single Security Gateway
[Expert@MySingleGW:0]# cpconfig This program will let you re-configure your Check Point products configuration.
Configuration Options: ---------------------- (1) Licenses and contracts (2) SNMP Extension (3) PKCS#11 Token (4) Random Pool (5) Secure Internal Communication (6) Enable cluster membership for this gateway (7) Check Point CoreXL (8) Automatic start of Check Point Products
(9) Exit
Enter your choice (1-9) : |
Example 2 - Menu on a Cluster Member
[Expert@MyClusterMember:0]# cpconfig This program will let you re-configure your Check Point products configuration.
Configuration Options: ---------------------- (1) Licenses and contracts (2) SNMP Extension (3) PKCS#11 Token (4) Random Pool (5) Secure Internal Communication (6) Disable cluster membership for this gateway (7) Enable Check Point Per Virtual System State (8) Enable Check Point ClusterXL for Bridge Active/Standby (9) Check Point CoreXL (10) Automatic start of Check Point Products
(11) Exit
Enter your choice (1-11) : |
