You can monitor IPv6 OSPF in the Gaia Portal and in the Gaia Clish.
Parameter
|
Description
|
border-routers
|
Shows the state of each area border router:
- Router ID
- OSPF area
- Associated route cost
|
database
area {backbone | <area_id>}
areas [detailed]
checksum
database-summary
detailed
external-lsa [detailed]
inter-area-prefix-lsa [detailed]
inter-area-router-lsa [detailed]
intra-area-prefix-lsa [detailed]
link-lsa [detailed]
network-lsa [detailed]
router-lsa [detailed]
type {1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9}
|
Show the OSPF database information:
area {backbone | <area_id>} - Router-link state, network-link state, AS-border-router-link state, AS- external-link state, and summary-link state statistics for the specified OSPF area; for each interface in this OSPF area, shows the checksum, sequence number, and link countareas [detailed] - Router-link state, network-link state, AS-border-router-link state, AS- external-link state, and summary-link state statistics for each OSPF area; for each OSPF interface, shows the checksum, sequence number, and link count
|
|
checksum - Checksum sum for each OSPF interface
|
|
database-summary - Summary of all types of LSAs
|
|
detailed - Detailed statistics on all types of LSAs
|
|
external-lsa [detailed] - Type 5 (AS-external) LSA statistics for each OSPF area
|
|
inter-area-prefix-lsa [detailed] - Type 3 (Summary) LSA statistics for each OSPF area (OSPFv3 only)
|
|
inter-area-router-lsa [detailed] - Type 4 (ASBR) LSA statistics for each OSPF area (OSPFv3 only)
|
|
intra-area-prefix-lsa [detailed] - Type 9 (Intra-Area Prefix) LSA statistics for each OSPF area (OSPFv3 only)
|
|
link-lsa [detailed] - Type 8 (Link) LSA statistics for each OSPF area (OSPFv3 only)
|
|
network-lsa [detailed] - Type 2 (Network) LSA statistics for each OSPF area
|
|
nssa-external-lsa [detailed] - Type 7 (NSSA) LSA statistics for each OSPF area (OSPFv2 only)
|
|
opaque-lsa [detailed] - Opaque LSA statistics for each OSPF area (OSPFv2 only)
|
|
router-lsa [detailed] - Type 1 (Router) LSA statistics for each OSPF area
|
|
summary-lsa [detailed] - Summary of all LSAs for each OSPF area (OSPFv2 only)
|
|
type {1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9} - LSA statistics for each type of LSA:- 1 - Router LSA
- 2 - Network LSA
- 3 - Summary LSA in OSPFv2, Inter-Area Prefix LSA in OSPFv3
- 4 - Summary ASBR LSA in OSPFv2, Inter-Area Router LSA in OSPFv3
- 5 - External LSA in OSPFv2, AS-External LSA in OSPFv3
- 7 - NSSA LSA in OSPFv2 only, not supported in OSPFv3
- 8 - Link LSA in OSPFv3 only, not supported in OSPFv2
- 9 - Intra-Area Prefix LSA in OSPFv3 only, not supported in OSPFv2
|
errors {dd | hello | ip | lsack | lsr | lsu | protocol}
|
Number of error messages sent, per type:
dd - Database description error messageshello - Hello error messagesip - IP error messageslsack - Link-state acknowledgment error messageslsr - Link-state request error messageslsu - Link-state update error messagesprotocol - Protocol error messages
|
events
|
Number of these types of events:
- Interface down
- Interface up
- Virtual interface down
- Virtual interface up
- Designated Router (DR) elections
- Router ID (RID) changes
- Area border router (ABR) changes
- AS border router (ASBR) changes
- RFC1583 changes
- LSA self-advertisement messages
|
interface <interface_name> [detailed | stats]
|
Shows OSPF information for the specified interface:
- <interface_name> - interface name
- IP address
- Area ID
- State
- Number of logged errors (NC)
- DR Interface IP address
- BDR Interface IP address
|
|
detailed -- IP Address
- Area
- Router ID
- Network type
- Cost
- Authentication type
- Error count
- Event count
- Transmit delay
- State
- Priority
- Designated Router (DR) ID and interface IP address
- Backup Designated Router (BDR) ID and interface IP address
- Hello, Dead, Wait, and Retransmit timers (in seconds)
- Next Hello timer
- Neighbor count
- Count of lost 2-way connections with neighbors
|
|
stats -- Total Errors
- Hello Interval Mismatch
- External Option Error
- Delayed Ack Count
- Dead Interval Mismatch
- Lost Neighbor Count
- Authentication Errors
- Duplicate Router ID
- Neighbor Errors
- Newer Self LSA Count
- Neighbor Count
|
interfaces [detailed | stats]
|
Shows OSPF information for all interfaces:
- Without command options
- IP address
- Area ID
- State
- Number of logged errors (NC)
- DR Interface IP address
- BDR Interface IP address
|
|
detailed -- IP Address
- Area
- Router ID
- Network type
- Cost
- Authentication type
- Error count
- Event count
- Transmit delay
- State
- Priority
- Designated Router (DR) ID and interface IP address
- Backup Designated Router (BDR) ID and interface IP address
- Hello, Dead, Wait, and Retransmit timers (in seconds)
- Next Hello timer
- Neighbor count
- Count of lost 2-way connections with neighbors
|
|
stats -- Total Errors
- Hello Interval Mismatch
- External Option Error
- Delayed Ack Count
- Dead Interval Mismatch
- Lost Neighbor Count
- Authentication Errors
- Duplicate Router ID
- Neighbor Errors
- Newer Self LSA Count
- Neighbor Count
|
neighbor <neighbor_IP> [detailed]
|
Shows OSPF information for the specified OSPF neighbor:
- Priority
- State
- Number of logged errors
|
neighbors [detailed]
|
Shows OSPF information for each OSPF neighbor:
- IP address
- Priority
- State
- Number of logged errors
|
packets
|
Shows the number of received (Rx) and transmitted (Tx) OSPF packets:
- Hello Rx
- Hello Tx
- Link State Update Rx
- Link State Update Tx
- Link State Ack Rx
- Link State Ack Tx
- Link State Request Rx
- Link State Request Tx
|
routemap
|
Shows OSPF Import Policy and Export Policy.
|
summary
|
Shows detailed OSPF configuration.
|
