Print Download PDF Send Feedback

Previous

Next

Network Objects

Access Zones are made up of network objects. You define network objects by specifying one or more:

Create network objects for areas that programs must have access to, or areas that programs must be prevented from accessing.

Define objects for each policy or define objects before you create a policy. After defining an object, the object can be reused in other policies.

The same Network Objects and Services are used throughout the SmartEndpoint and in SmartConsole. When you create a new object, it is also available in SmartConsole. If you change an object in the SmartEndpoint or SmartConsole, it is changed everywhere that the object is used.

Note - The Trusted Zone and the Internet Zone can also be used as objects in a Firewall policy. These objects are resolved dynamically by the client based on Access Zones policy assignment to the client.

Configuring a Host as a Network Object

Enter data that defines the network object:

Object Information

Description

Name

A name for the network object. The name must start with a letter and can include capital and small letters, numbers and '_'. All other characters are prohibited.

IP Address

The IP address of the host you want to use as a network object.

Color

Select a color to be used for the icon for this network object.

Comment

A description of the network object.

Configuring an Address Range as a Network Object

Enter data that defines the network object:

Object Information

Description

Name

A name for the network object. The name must start with a letter and can include capital and small letters, numbers and '_'. All other characters are prohibited.

First IP Address / Last IP Address

The first and last IP addresses for the network object.

Color

Select a color to be used for the icon for this network object.

Comment

A description of the network object.

Configuring a Network as a Network Object

Enter data that defines the network object:

Object Information

Description

Name

A name for the network object. The name must start with a letter and can include capital and small letters, numbers and '_'. All other characters are prohibited.

Network Address

The network address you want to use as a network object.

Net Mask

The net mask.

Color

Select a color to be used for the icon for this network object.

Comment

A description of the network object.

Configuring a Site as a Network Object

Enter data that defines the network object:

Rule Condition

Description

Name

A name for the network object. The name must start with a letter and can include capital and small letters, numbers and '_'. All other characters are prohibited.

Host Name

The full LDAP name of the host of the site you want to use as a network object. For example, hostname.acme.com.

Color

Select a color to be used for the icon for this network object.

Comment

Enter a description of the network object.

Configuring a Group as a Network Object

  1. Enter data that defines the network object.
  2. Select from the Available Objects column, or create new objects.

Fields:

Rule Condition

Description

Name

A name for the network object. The name must start with a letter and can include capital and small letters, numbers and '_'. All other characters are prohibited.

Color

Select a color to be used for the icon for this network object.

Comment

Enter a description of the network object.

Configuring a Site Group as a Network Object

  1. Enter data that defines the network object:

    Rule Condition

    Description

    Name

    A name for the network object. The name must start with a letter and can include capital and small letters, numbers and '_'. All other characters are prohibited.

    Color

    Select a color to be used for the icon for this network object.

    Comment

    Enter a description of the network object.

  2. Select an object from the Available Objects column, or create a new object of the type:
    • Site
    • Site Group