Print Download PDF Send Feedback

Previous

Next

Advanced Configuration and Troubleshooting

The following sections explain how to maintain the DLP gateway and captured files.

Configuring User Access to an Integrated DLP Gateway

To use the DLP Portal and UserCheck, users must be allowed to access the DLP gateway. By default, users can only access the DLP gateway through its internal interfaces, but not through its external interfaces.

You can configure user access to the DLP gateway in SmartConsole in the Accessibility section of the Data Loss Prevention page of the DLP gateway object. The options are:

Note - We do not recommend that you use "Through all interfaces" when the DLP gateway is deployed at the perimeter.

Internal Firewall Policy for a Dedicated DLP Gateway

A dedicated DLP gateway enforces a predefined, fixed Internal firewall policy. This policy gives users access to the DLP gateway for the UserCheck services: DLP Portal, UserCheck, and SMTP. The policy is made up of implied rules.

The Internal Firewall Policy on a dedicated DLP gateway is not related to the Data Loss Prevention (DLP) Policy that is defined by the administrator in the Policy page of the Data Loss Prevention tab of SmartConsole. It is also not related to the Firewall Policy which is explicitly defined by the administrator in the Firewall tab of SmartConsole.

If you do an Install Policy:

Important - A dedicated DLP gateway does not enforce the Firewall Policy, Stateful Inspection, anti-spoofing or NAT. Check Point recommends that you place it behind a protecting Security Gateway or firewall.

The Internal Firewall Policy lets users access these services and ports (and no others) on the DLP gateway:

Feature

Service

TCP Port

DLP Portal

TCP HTTP

80

TCP HTTPS

443

UserCheck

TCP

18300

TCP HTTPS

443

WebUI

TCP

4434

Reply-to-email

SMTP

25

Secure Shell

SSH

22

ICMP

ICMP requests

 

Advanced Expiration Handling

You can change the time to expire for unhandled UserCheck incidents. This is done in the DLP configuration files. You must make sure that the expiration of incidents is greater than the expiration time for learning user actions, to ensure that you do not nullify the feature that learns user actions.

To change expiration time:

  1. On the DLP gateway, open the $FWDIR/dlp/config/dlp.conf file.
  2. Find the expiration for quarantine parameter:

    :backend (

    :expiration (

    :quarantine (604800)

    The default value is 604800. This is the number of seconds that a DLP Ask User incident will be held in the DLP gateway until the user decides whether it should be sent or discarded.

  3. Find the expiration for learning user actions (called thread_caching) in the same backend section.

    :backend (

    .(

    .

    .

    )

    :thread_caching (

    :cache_expiration_in_days (7)

    The value of backend:expiration:quarantine, when converted from seconds to days, must be greater than or equal to the value of backend:thread_caching:cache_expiration_in_days.

  4. Change the value of quarantine as needed.

    By default, incident data is held in the gateway for 21 days after the incident actually expired. This extra time enables you to retrieve data for users who were on vacation, for example. You can change the removal interval.

  5. Change the value (in days) of backend:expiration:db as needed.

    :backend (

    :expiration (

    :db (21)

  6. Save dlp.conf and install the policy on the DLP gateway.

Advanced SMTP Quotas

The DLP quota check ensures that users are not overloading the file system with unhandled UserCheck incidents. If a user has so many captured emails, or emails with large attachments, that the quota per user is exceeded, DLP handles the issue.

The email quota threshold has two values - minimum and maximum. If a user exceeds the maximum email quota, DLP deletes older emails until the user's file system folder size is lower than the minimum quota threshold.

To change quota behavior:

  1. On the DLP gateway, open the $FWDIR/conf/mail_security_config file.
  2. Find the quota parameters:

    #is quota for mail repository active value can be 0 or 1

    user_quota_active=1

    #quota size per user in Mega Byte currently set to 100 mb per user

    quota_size_per_user=100

    #quota size per user upper and lower limit in percentage values can range between 0 to 100 and upper can't be smaller than lower

    user_quota_upper_limit=90

    user_quota_lower_limit=50

    • To deactivate quota checks and deletes, set user_quota_active to 0.

    The remaining options are relevant only if user_quota_active=1.

    • To change the folder size allowed to each user for DLP incidents and data, change the value of quota_size_per_user (MB).
    • To set the threshold (percent of quota size) that when exceeded, older emails are deleted, change the value of user_quota_upper_limit. By default, if 90% of the quota size is exceeded, DLP begins to delete older emails.
    • To set the lower limit (percent of quota size), change the value of user_quota_lower_limit. By default, quota cleanup stops when enough emails are deleted to bring the user folder size to 50% of the quota size, or lower.
  3. Save mail_security_config and install the policy on the DLP gateway.

Advanced FTP and HTTP Quotas

This quota check ensures that users are not overloading the file system with unhandled UserCheck incidents using FTP or HTTP transmissions. If a user has so many captured HTTP posts, or large FTP upload attempts, that the quota per user is exceeded, DLP handles the issue.

To change quota behavior:

  1. On the DLP gateway, open the $FWDIR/dlp/conf/dlp.conf file.
  2. Find the HTTP or the FTP section, and this parameter: save_incident_quota_percentage

    The default value is 85. This is 85% of the file system, for this type of transmission. The value range is 0 to 100. If zero, no quota is enforced.

  3. Change this value to change the threshold that initiates the cleanup.

    When disk usage is greater than this value, incidents are not saved.

    Best Practice - If you decrease this value, decrease the age of FTP and HTTP incidents before deletion, to ensure that you have enough disk space to save incidents:

    $FWDIR/conf/mail_security_config file >
    dlp_delete_redundant_files_age_group1_files parameter

  4. Save dlp.conf and install the policy on the DLP gateway.

Advanced User Notifications

You can enable or disable email notifications that are sent to users when their captured DLP incidents or incident data are deleted from the gateway.

Notifications are especially important if incidents and data are deleted because of exceeding quota (may occur if the user's email storage exceeds the user-allowed limit), because:

On the other hand, if a user gets a notification that an incident expired because it wasn't handled in time, you can still retrieve the data of the incident (if needed). DLP deletes the data of expired incidents a number of days after the data expired.

You can configure, which DLP automatic actions fire the notifications.

To activate or de-activate user notifications of DLP deletion:

  1. Open the GuiDBedit Tool (see sk13009).
  2. In the top left pane, go to Table > Other > dlp_data_tbl.
  3. In the top right pane, click dlp_general_settings_object.
  4. In the bottom pane, in the Field Name column, scroll down to the notification object.

    You will see different types of notifications (see the text in the Field description column).

  5. To enable a notification, set the value of its active attribute to true.
  6. Save the changes (File menu > Save All).
  7. Close the GuiDBedit Tool.
  8. In SmartConsole, install the policy.

Troubleshooting: Incidents Do Not Expire

If UserCheck incidents are not expiring, or the change in value of the quarantine parameter seems to have no effect, verify that expiration is enabled.

To enable expiration of UserCheck incidents:

  1. On the DLP gateway, open the $FWDIR/conf/mail_security_config file.
  2. Find the expiration active parameter:

    [mail_repository]

    #is expiration for mail repository active value can be 0 or 1

    expiration_active=1

    The default value is 1. If the value of expiration_active is 0, incidents will not expire.

  3. Save mail_security_config and install the policy on the DLP gateway.

Troubleshooting: Mail Server Full

The /var/spool/mail directory may become full. This may occur if you de-activate the settings to delete incident data after expiration or on exceeding quota. It may also occur due to regular usage, depending on your environment. The quota for the DLP data to be held on the mail server is set in the configuration files.

DLP routinely checks the usage on the Mail Server /var/spool/mail directory against the DLP global_quota_percentage parameter. If usage on the Mail Server exceeds the global quota: no more emails are stored; all emails of UserCheck incidents are passed; and logs are issued.

To change the quota use percentage:

  1. On the DLP gateway, open the $FWDIR/conf/mail_security_config file.
  2. Find the global quota parameter:

    # ... no more emails are written and a log comes out every 5 minutes

    global_quota_percentage=80

    The default value is 80 (% of Mail Server used).

  3. Change the value to the usage percent you want.
  4. Save mail_security_config and install the policy on the DLP gateway.

To change DLP behavior if global quota is exceeded:

  1. On the DLP gateway, open the $FWDIR/dlp/config/dlp.conf file.
  2. Find the SMTP parameters:

    :smtp (

    :enabled (1)

    :max_scan_size (150000000)

    :max_recursion_level (4)

    :max_attachments (100)

    :block_on_engine_error (0)

    • If you want UserCheck emails to be sent and logged (same behavior as Detect), leave
      block_on_engine_error (0)
    • If you want UserCheck emails to be dropped and logged (same behavior as Prevent), change the value to 1:
      block_on_engine_error (1)
  3. Save dlp.conf and install the policy on the DLP gateway.

Important - For security and performance, it is recommended that you leave the Mail Server quota activated. However, if you do need to de-activate it, set the global_quota_active parameter in $FWDIR/conf/mail_security_config to 0.

Gateway Cleanup of Expired Data

The complete data of UserCheck incidents are held in quarantine on the DLP gateway. Thus, if an email is caught, and it contains a large attachment, it takes up the required space on the gateway until the incident is handled or expires.

The DLP gateway automatically cleans itself of expired incident data. Incident data that is held for the backend:expiration:db number of days will be deleted.

To change how often and when the gateway checks for data to delete:

  1. On the DLP gateway, open the $FWDIR/conf/mail_security_config file.
  2. Find the expiration interval parameter:

    #A check for expired email items is executed every 'expiration_interval' minutes

    expiration_interval=1440

    #the first time of execution for the expiration feature set to begin at 3:30 in the morning when there is no traffic on the system

    expiration_execution_time=3:45

  3. Change the value of expiration_interval (minutes), to have the gateway search for expired data on a different interval. The default is 1440 minutes, which is one day.
  4. Change the value of expiration_execution_time (24 hour clock), to change the time of day that the gateway is cleaned. Be default, this is 3:45 AM, to ensure that gateway maintenance does affect performance during usual working hours.
  5. Save mail_security_config and install the policy on the DLP gateway.

Gateway Cleanup of All Captured Data

DLP automatically cleans its gateway periodically of temporary files, to make sure that disk use does not unduly build over time. But sometimes unnecessary files are left on the disk.

You can customize the cleanup with these configuration files:

Important - It is not recommended to de-activate the cleanup. If you must do so, set the value of dlp_delete_redundant_files_active to 0.

mail_security_config Parameters

Description

dlp_delete_redundant_files_interval

How often (in minutes) cleanup runs.

Default = 1440 (24 hours)

dlp_delete_redundant_files_execution_time

Exact time (on 24 hour clock) when cleanup runs.

Default = 4:45 (when gateway load is low)

dlp_delete_redundant_files_age_group1_files

Minimum age of UserCheck data files, which should be maintained on the disk until their handling expiration arrives.

Default = 0 (use the expiration_time_in_days value)

Note: This value does not change the expiration of incidents; it changes when data of expired incidents is removed.

dlp_delete_redundant_files_age_group2_files

Minimum age of files in /proc

Default = 15 minutes

dlp_delete_redundant_files_age_group3_files

Minimum age of files in $FWDIR/tmp/dlp

Default = 15 minutes

The dlp_cleanup_files_list.conf file is a list of scan commands with the following syntax:

scan [ CHECK_DB | - ] path mask scale age

Parameter

Description

CHECK_DB
or
-

Tests files to see if they are in the DLP database, to prevent accidental deletion of UserCheck incident data: scan CHECK_DB

To clean up everything, even user captured data, change the flag to a dash ( - ): scan -

path

Path to look for files to delete. May include shortcuts such as $DLPDIR or $FWDIR, but cannot contain spaces.

mask

Regular expressions for files to match: * = all files

Default masks used include: *.eml, *.result, *.meta

scale

Unit of measure for age parameter: minutes_back or days_back

age

Minimal time since creation the file must have before it can be deleted

Best Practice - Contents of this file explain more options, such as how to use macros for file age. It is recommended that you read the file comments before changing anything here.

The default age values of scan commands in the file are macros that pull values from mail_security_config. You can use numeric values instead of macros.

age Macros

Description

$2

group1 age (in days): UserCheck data files, value taken from dlp_delete_redundant_files_age_group1_files

$3

group2 age (in minutes): /proc files, value taken from dlp_delete_redundant_files_age_group2_files

$4

group3 age (in minutes): /tmp/dlp files, value taken from dlp_delete_redundant_files_age_group3_files

Customizing DLP User-Related Notifications

These procedures explain how to customize backend files to change the text of user-related notifications.

It is also possible to localize the files to a language other than US English.

To customize the DLP notification emails:

  1. On the gateway in $DLPDIR/backend/conf/, edit these files:

    File

    Purpose

    dictionary_en_us.conf

    Basic dictionary

    about_to_expire_notification_tmplt_en_us.html

    Email notifications

    data_owners_mail_notification_tmplt_en_us.html

    detect_mail_notification_tmplt_en_us.html

    expired_owners_mail_tmplt_en_us.html

    expired_sender_mail_tmplt_en_us.html

    failure_mail_notification_en_us.html

    prevent_mail_notification_tmplt_en_us.html

    quarantine_mail_notification_tmplt_en_us.html

    quota_deleted_notification_tmplt_en_us.html

    released_mail_notification_tmplt_en_us.html

  2. Install Policy on the DLP gateway.

To customize the UserCheck DLP notifications (Available from R71.10 DLP):

You can customize UserCheck notifications by editing files. For example, to edit the notification in the screenshot, you edit quarantine_smtp_uc_notification_tmplt_en_us.html

DLP Client Notification Example

  1. On the gateway in $DLPDIR/backend/conf, edit these UserCheck notification files:

    File

    Purpose

    inform_ftp_uc_notification_tmplt_en_us.html

    ftp protocol when the action is inform

    inform_http_uc_notification_tmplt_en_us.html

    http protocol when the action is inform

    inform_smtp_uc_notification_tmplt_en_us.html

    smtp protocol when the action is inform

    prevent_ftp_uc_notification_tmplt_en_us.html

    ftp protocol when the action is prevent

    prevent_http_uc_notification_tmplt_en_us.html

    http protocol when the action is prevent

    prevent_smtp_uc_notification_tmplt_en_us.html

    smtp protocol when the action is prevent

    quarantine_ftp_uc_notification_tmplt_en_us.html

    ftp protocol when the action is ask

    quarantine_http_uc_notification_tmplt_en_us.html

    http protocol when the action is ask

    quarantine_smtp_uc_notification_tmplt_en_us.html

    smtp protocol when the action is ask

  2. Install Policy on the DLP gateway.

To customize the DLP Portal:

Note - Never change the key as it may be used in more than one place, and a call for a missing key may result in runtime error. You should only change the textual content. Use these rules:

  • Keep only HTML
  • Must not contain double quotes, dollar sign or backslash symbols.
  • May contain HTML entities.
    For example: " (double quote), $ (dollar sign), \ (backslash)
  1. On the gateway, customize the file $DLPDIR/portal/apache/phpincs/conf/L10N/portal_en_US.php.
  2. To apply the changes, run cpstop and cpstart on the gateway.

To customize notification text in SmartConsole:

  1. Open SmartConsole > Data Loss Prevention.
  2. From the categories on the left, select Policy.
  3. In a rule that has notification as part of the Action, right-click Action and select Edit Notification.
  4. Change the notification text.
  5. Install Policy on the DLP gateway.

Important - Changes in the files will be lost when you upgrade to the next version. We recommend you maintain a copy of the all changes files, to overwrite upgraded files.

Localizing DLP User-Related Notifications

You can localize the text of all user-related notifications to a language other than US English.

Change notification text in email, UserCheck, and portal backend files, and in SmartConsole to the same language.

Note - DLP can detect Data Types in all languages

Supporting LDAP Servers with UTF-8 Records

By default, DLP supports LDAP users with English-language ASCII encoding only.

To support LDAP servers with UTF-8 user records:

  1. Connect with GuiDBedit Tool (see sk13009) to Security Management Server.
  2. On the left, select Managed Objects > Servers.
  3. For each LDAP Account Unit named <ldap_au_name> that stores credentials in UTF-8, change the value of the SupportUnicode attribute to true.
  4. Save the changes.
  5. In SmartConsole, install Policy on the DLP gateway.

Configuring the Corporate Guidelines Link

You can set up a link to your corporate Data Loss Prevention guidelines. It is embedded in notification emails. Your guidelines should help the user decide whether it is safe to send a given message that was matched on Ask User rules.

By default there is no link defined for corporate guidelines. You define this link for each DLP gateway.

To configure a link to your corporate guidelines:

  1. Open a command line on the DLP gateway.
  2. Open the $DLPDIR/config/dlp.conf file.
  3. In the backend section, corporate_info_link parameter, add your link.
  4. Do Install Policy on the DLP gateway.

Editing Extreme Condition Values

You can configure two options for extreme conditions in SmartConsole that determine when to prefer connectivity:

These options are configured in SmartConsole in the Data Loss Prevention tab > Additional Settings > Advanced > Extreme Conditions section.

You can see the default values for extreme conditions in the GuiDBedit Tool (see sk13009). With GuiDBedit Tool, you can edit the default values for parameters related to extreme conditions (see fields below).

To edit Extreme Condition field values:

  1. Close all SmartConsole GUI clients.
  2. Connect with GuiDBedit Tool (see sk13009) to Security Management Server.
  3. In the left pane, select Table > Other > dlp_data_tbl.
  4. In the right pane, select dlp_general_settings_object.
  5. In the bottom pane, in the Field Name column, find engine_settings.
  6. You can configure these fields if the When the Gateway is under heavy CPU load checkbox is selected:

    Field Name

    Description

    Default Value

    cpu_high_watermark

    Threshold for stopping inspection on heavy load. When CPU load is more than the defined threshold, DLP bypasses the protocols set to True.

    90%

    cpu_low_watermark

    Threshold for resuming inspection after the cpu_high_watermark was reached. When CPU load is less than the defined threshold, DLP inspects the protocols set to True.

    70%

    prefer_connectivity_on_heavy_load_protocols > ftp_inspection

    By default, DLP bypasses FTP traffic on heavy load. If you change this to false, FTP is inspected on heavy load.

    true

    prefer_connectivity_on_heavy_load_protocols > http_inspection

    By default, DLP bypasses HTTP traffic on heavy load. If you change this to false, HTTP is inspected on heavy load.

    true

    prefer_connectivity_on_heavy_load_protocols > smtp_inspection

    By default, DLP inspects SMTP traffic on heavy load. If you change this to true, SMTP is bypassed on heavy load.

    false

  7. You can configure these fields if the Under all other extreme conditions checkbox is selected:

    Field Name

    Description

    Default Value

    ftp_max_files
    http_max_files
    smtp_max_files

    The maximum number of files (attachments) in an FTP/HTTP/SMTP message.

    100

    ftp_max_message_size_in_mega
    http_max_message_size_in_mega
    smtp_max_message_size_in_mega

    The maximum size in MB of an FTP/HTTP/SMTP message.

    150

    max_recursion_level

    How many recursion levels deep can be done for archived messages.

    6

  8. Save the changes and close GuiDBedit Tool.
  9. Install policy in SmartConsole.

    Note - It is possible to either prefer connectivity or security upon cluster failover. You can set this in Gateway Cluster Properties > IPS > Upon Cluster Failover.

Editing Exchange Security Agent Values

You can edit default values for parameters related to the Exchange Security Agent in the GuiDBedit Tool (see sk13009) or dbedit (see skI3301).

To edit Exchange Security Agent values:

  1. Close all SmartConsole windows.
  2. Connect with GuiDBedit Tool (see sk13009) to Security Management Server.
  3. In the left pane, go to Table > Other > dlp_data_tbl.
  4. In the right pane, select the Exchange Agent object that represents the SmartConsole Exchange Security Agent object.
  5. In the bottom pane, in the Field Name column, you can configure these fields:

    Field Name

    Description

    Default Value

    is_tap_mode

    The Exchange Security Agent sends messages to the Security Gateway but does not wait for a response from the Security Gateway.

    For all rules with the detect or inform action, the Exchange Security Agent is automatically configured to work in tap mode.

    For other rules, the default is to not work in tap mode. If you want the system to always work in tap mode, change the value from false to true.

    False

    scan_mails_received_from_sender_out_of_my_organization

    If to scan SMTP messages from a domain that is not in the organization's Exchange.

    By default this value is false. This means that it will only scan messages from your organization's Exchange. To scan messages from senders outside of the domain, change the value to true.

    False

    scan_mails_send_to_recipient
    _from_my_organization

    If to scan internal traffic.

     

    True

    scan_mails_send_to_recipient
    _out_my_organization

    If to scan messages sent outside of the organization.

    True

    dont_scan_smtp

    Scans messages received by the Exchange server in SMTP. This means that messages in SMTP arriving from the same domain will be scanned.

    False

  6. In the right pane, select dlp_general_settings_objects to configure this field:

    Field Name

    Description

    Default Value

    exchange_send_status_to_gw
    _frequency

    The time interval that the Exchange Security Agent sends statuses to the Security Gateway.

    10

    user_dlp_logs_customization
    _settings > send_log_for_each
    _skipped_email_with_allow_status

    If to send logs about messages that are not sent to the gateway because of the Inspection Scope settings.

    False

  7. In the left pane, select Network Objects > Network Objects > <Security Gateway object > > data_loss_prevention_blade_settings to configure this field:

    Field Name

    Description

    Default Value

    encrypt_exchange_traffic

    The Exchange Security Agent sends traffic to the Security Gateway encrypted in TLS.

    True

  8. Save the changes.
  9. Close GuiDBedit Tool.
  10. Install policy in SmartConsole.

Configuring HTTP Inspection on All Ports

You can configure inspection of HTTP transmissions on all ports (standard HTTP ports 80, 8080, and other non-standard ports you might have configured).

To enable HTTP inspection on all ports:

  1. In SmartConsole, click Gateways & Servers and double-click the Security Gateway.

    The gateway window opens and shows the General Properties page.

  2. From the navigation tree, click Data Loss Prevention > Protocols.
  3. Click default protocols.

    The Default Protocols window opens.

  4. Click Enable HTTP inspection on nonstandard ports.
  5. Click OK.

    Note - When you set HTTP inspection on all ports there is a performance impact.

  6. Close the gateway window and Install Policy.

Defining New File Types

You can define a Data Type based on a file type with the "File Attributes" Data Type. This Data Type offers several file type families.

To add a new file type to the File Data Type options:

  1. Open GUIDBEdit:
    1. On the SmartConsole computer, run:
      C:\Program Files\CheckPoint\SmartConsole\R80.30\PROGRAM\GuiDBEdit.exe
    2. Log in with your SmartConsole credentials.
  2. Under Other > dlp_data_tbl create a new object of file_type type.
  3. Name the object file_type_<ID>. For the full list of IDs see the table below.
  4. Enter a name for the file type in the visual_string field.
  5. Enter a description for the file type in the description field (optional).
  6. Save the new created object and close GUIDBEdit.
  7. Install Policy.

Supported File Types

ID

File Type

ID

File Type

1

Word for DOS 4.x

2

Word for DOS 5.x

3

Wordstar 5.0

4

Wordstar 4.0

5

Wordstar 2000

6

WordPerfect 5.0

7

MultiMate 3.6

8

MultiMate Advantage 2

9

IBM DCA/RFT

10

IBM DisplayWrite 2 or 3

11

SmartWare II

12

Samna

13

PFS: Write A

14

PFS: Write B

15

Professional Write 1

16

Professional Write 2

17

IBM Writing Assistant

18

First Choice WP

19

WordMarc

20

Navy DIF

21

Volkswriter

22

DEC DX 3.0 and below

23

Sprint

24

WordPerfect 4.2

25

Total Word

26

Wang IWP

27

Wordstar 5.5

28

Wang WPS

29

Rich Text Format (RTF)

30

Mac Word 3.0

31

Mac Word 4.0

32

Mass 11

33

MacWrite II

34

XyWrite / Nota Bene

35

IBM DCA/FFT

36

Mac WordPerfect 1.x

37

IBM DisplayWrite 4

38

Mass 11

39

WordPerfect 5.1/5.2

40

MultiMate 4.0

41

Q&A Write

42

MultiMate Note

43

PC File 5.0 Doc

44

Lotus Manuscript 1.0

45

Lotus Manuscript 2.0

46

Enable WP 3.0

47

Windows Write

48

Microsoft Works 1.0

49

Microsoft Works 2.0

50

Wordstar 6.0

51

OfficeWriter

52

Mac Word 4.x Complex

53

IBM DisplayWrite 5

54

Word for Windows 1.x

55

Word for Windows 1.x complex

56

Ami

57

Ami Pro

58

First Choice 3 WP

59

Mac WordPerfect 2.0

60

Mac Works 2.0 WP

61

Professional Write Plus

62

Legacy

63

Signature

64

Wordstar for Windows

65

Word for Windows 2.0

66

JustWrite 1.0

67

Wordstar 7.0

68

Windows Works WP

69

JustWrite 2.0

70

Ami [Clip]

71

Legacy [Clip]

72

Pro Write Plus [Clip]

73

Mac Word 5.x

74

Enable WP 4.x

75

WordPerfect 6.0

76

Word for DOS 6.x

77

DEC DX 3.1

78

WordPerfect Encrypted

79

Q&A Write 3

80

Mac WordPerfect 3.0

83

WordPerfect 5.1 Far East

84

Ichitaro 3.x

85

Ichitaro 4.x/5.x/6.x

86

Word for Windows 1.2 J

87

Word for Windows 5.0 J

88

Matsu 4

89

Matsu 5

90

P1 Japan

91

Rich Text Format Japan

92

CEO Write

93

Windows Works 3.0 WP

94

Microsoft WordPad

95

WP/Novell Unknown Format

96

Word for Windows 2.0 Object

97

WordPerfect 6.1 - 12.0 / X3

98

Fulcrum Document Format

99

Europa Fulcrum 5

100

Europa Fulcrum 6

101

Internet HTML

102

Word 7.0

103

Arehangeul

104

Hana

105

Windows Works 4.0 WP

106

PerfectWorks for Windows

107

WordPerfect 7.0/8.0/10.0

108

WordPro 96

109

HTML - Central European

110

HTML - Japanese (ShiftJIS)

111

HTML - Japanese (EUC)

112

HTML - Chinese (Big5)

113

HTML - Chinese (EUC)

114

HTML - Chinese (GB)

115

HTML - Korean (Hangul)

116

HTML - Cyrillic (ANSI 1251)

117

HTML - Cyrillic (KOI8-R)

118

Text - Cyrillic (ANSI 1251)

119

Cyrillic (KOI8-R)

120

WWRITE - Japan SJIS

121

WWRITE - Chinese GB

122

WWRITE - Hangul

123

WWRITE - Chinese BIG5

124

Digital WPS Plus

125

Mac Word 6

126

Microsoft Word 97/98

127

Rainbow

128

Interleaf 6

129

MIFF 3.0

130

MIFF 4.0

131

MIFF 5.0

132

Text Mail

133

Mac Word 97

134

Interleaf Japan

135

MIFF 3.0 Japan

136

MIFF 4.0 Japan

137

MIFF 5.0 Japan

138

MIFF 5.5

139

WordPerfect 8.0/10.0

140

Ichitaro 8.x/9.x/10.x/11.x/12.x/13.x/2004

141

vCard

142

HTML - Cascading Style Sheets

143

MS Outlook

144

Pocket Word

145

WordPro 97/Millennium

146

Microsoft Word 2000

147

Word 2000 HTML

148

Excel 2000 HTML

149

PowerPoint 2000 HTML

150

Extensible Markup Language (XML)

151

Wireless Markup Language (WML)

152

WMLB

153

HTML - Japanese (JIS)

154

WML - Chinese (Big5)

155

WML - Chinese (EUC)

156

WML - Chinese (GB)

157

WML - Cyrillic (ANSI 1251)

158

WML - Cyrillic (KOI8-R)

159

WML - Japanese (JIS)

160

WML - Japanese (ShiftJIS)

161

WML - Japanese (EUC)

162

WML - Korean (Hangul)

163

WML - Central European

164

WML – CSS

165

StarOffice 5.2 Writer

166

MIFF 6.0

167

MIFF 6.0 Japan

168

MIFF

169

Java Script

170

ASCII Text

171

Handheld Device Markup Language (HDML)

172

Compact HTML (CHTML)

173

XHTML Basic

174

AvantGo HTML

175

Web Clipping Application (WCA) HTML

176

SearchML

177

Pocket Word - Pocket PC

178

Wireless HTML

179

Hangul 97 Word Processor

180

Hangul 2002 - 2007 Word Processor

181

Internet HTML – Unicode

182

XML With Doctype HTML

184

EBCDIC encoded Text

185

Microsoft Word 2002

186

Microsoft Word 2003/2004

187

Internet Message

188

StarOffice 6 & 7 Writer

189

Microsoft Outlook PST/OST 97/2000/XP

190

XHTML

191

Microsoft Works 2000

192

Internet Mail Message

193

Internet News Message

194

Outlook Express News Message

195

Outlook Express Mail Message

196

vCalendar

197

Transport-Neutral Encapsulation Format(TNEF)

198

MHTML(Web Archive)

199

Search HTML

200

Search Text

201

PST Fields File

202

Microsoft Outlook PST/OST 2003/2007

203

Microsoft Outlook PAB

204

SearchML 20

205

SearchML 30

206

Yahoo! Messenger Archive

207

Microsoft Word XML 2003

208

MS Office 12 Word format

209

StarOffice 8/Open Office 2.x Writer

210

SearchML 31

211

Outlook Form Template

212

Microsoft Word 2007

213

Password Protected Microsoft Word 2007

214

Microsoft Word 2007 Template

215

SearchML 32

216

DRM protected Unknown

217

DRM protected Microsoft Word

218

DRM protected Microsoft Word 2007

219

File sealed by Oracle IRM

220

Extensible Metadata Platform

221

SearchML 33

222

PHTML

223

Open Office Writer 6

224

Open Office Writer 8

225

IBM Lotus Symphony Document

226

SearchML 34

227

MS Office 12 (2007) Word - Macro Enabled XML format

228

MS Office 12 (2007) Word Template - Macro Enabled XML format

229

Microsoft Word Picture

230

Smart DataBase

231

DBase III

232

DBase IV or V

233

Framework III

234

Microsoft Works DB

235

DataEase 4.x

236

Paradox 2 or 3

237

Paradox 3.5

238

Q&A Database

239

Reflex

240

R:Base System V

241

R:Base 5000

242

R:Base File 1

243

R:Base File 3

244

First Choice DB

245

Mac Works 2.0 DB

246

Windows Works DB

247

Paradox

248

Microsoft Access

249

CEO Decision Base

250

Windows Works 3.0 DB

251

Windows Works 4.0 DB

252

Microsoft Access 7

253

Microsoft Project 98

254

Microsoft Project 2000/2002/2003

255

Microsoft Project 2002

256

MS Project 2007

257

Lotus Notes database

258

Symphony

259

Lotus 1-2-3 1.0

260

Lotus 1-2-3 2.0

261

Lotus 1-2-3 3.x

262

Smart Spreadsheet

263

Microsoft Excel 2.x

264

Enable Spreadsheet

265

Microsoft Works SS

266

VP-Planner

267

Mosaic Twin

268

SuperCalc 5

269

Quattro Pro

270

Quattro

271

PFS: Plan

272

First Choice SS

273

Microsoft Excel 3.0

274

Generic WKS

275

Mac Works 2.0 SS

276

Windows Works SS

277

Microsoft Excel 4.0

278

Quattro Pro for Windows

279

Lotus 1-2-3 4.x / 5.x

280

Quattro Pro Windows Japan

281

CEO Spreadsheet

282

Microsoft Excel 5.0/7.0

283

Multiplan 4.0

284

Windows Works 3.0 SS

285

Quattro Pro 4.0

286

Quattro Pro 5.0

287

Quattro Pro Win 6.0

288

Lotus 123 Release 2 for OS/2

289

Lotus 123 for OS/2 Chart

290

Windows Works 4.0 SS

291

Quattro Pro Win 7.0/8.0

292

Quattro Pro Win 7.0/8.0 Graph

293

Lotus 1-2-3 97 Edition

294

Microsoft Mac Excel 4.0

295

Microsoft Mac Excel 5.0

296

Microsoft Excel 97/98/2004

297

MS Excel 3.0 Workbook

298

MS Excel 4.0 Workbook

299

MS Excel Mac 4.0 Workbook

300

MS Excel Mac 4.0 Workbook

301

Lotus 1-2-3 98/Millennium Edition

302

Quattro Pro 8.0

303

Quattro Pro Win 9.0 / X3

304

Microsoft Excel 2000

305

Quattro Pro Win 10.0

306

Microsoft Excel 2002

307

StarOffice 5.2 Calc

308

Quattro Pro Win 11.0

309

Microsoft Excel 2003

310

StarOffice 6 & 7 Calc

311

Quattro Pro Win 12.0

312

StarOffice 8/Open Office 2.x Calc

313

Microsoft Excel 2007

314

Password Protected Microsoft Excel 2007

315

Microsoft Excel 2007 Binary

316

DRM protected Microsoft Excel 2007

317

DRM protected Microsoft Excel 2007

318

MS Works SS6

319

Open Office Calc 6

320

Open Office Calc 8

321

IBM Lotus Symphony Spreadsheet

322

Excel Template 2007

323

Excel Macro Enabled

324

Excel Template Macro Enabled 2007

325

Windows Bitmap

326

Tagged Image File Format

327

Paintbrush

328

Compuserve GIF

329

EPS (TIFF Header)

330

CCITT Group 3 Fax

331

Mac PICT2

332

WordPerfect Graphic

333

Windows Metafile

334

Lotus PIC

335

Mac PICT

336

Ami Draw

337

Targa

338

GEM Image

339

OS/2 Bitmap

340

Windows Icon

341

Windows Cursor

342

Micrografx product

343

MacPaint

344

Corel Draw 2.0

345

Corel Draw 3.0

346

HP Graphics Language

347

Harvard 3.0 Chart

348

Harvard 2.0 Chart

349

Harvard 3.0 Presentation

350

Freelance

351

WordPerfect Graphic 2

352

CGM Graphic Metafile

353

Excel 2.x Chart

354

Excel 3.0 Chart

355

Excel 4.0 Chart

356

Candy 4

357

Hanako 1.x

358

Hanako 2.x

359

JPEG File Interchange

360

Excel 5.0/7.0 Chart

361

Corel Draw 4.0

362

PowerPoint 4.0

363

Multipage PCX

364

PowerPoint 3.0

365

Corel Draw 5.0

366

OS/2 Metafile

367

PowerPoint 7.0

368

AutoCAD DXF (ASCII)

369

AutoCAD DXF (Binary)

370

AutoCAD DXB

371

Freelance 96/97/Millennium Edition

372

Mac PowerPoint 3.0

373

Mac PowerPoint 4.0

374

WordPerfect Presentations

375

OS/2 Warp Bitmap

376

AutoCAD Drawing 12

377

AutoCAD Drawing 13

378

Adobe Illustrator

379

Corel Presentations 7.0 - 12.0 / X3

380

WordPerfect Graphic 7.0/8.0/9.0

381

Adobe Acrobat (PDF)

382

Framemaker

383

RAS - Sun Raster

384

AutoShade Rendering

385

Kodak Photo CD

386

PowerPoint 4.0 (extracted from docfile)

387

Mac PowerPoint 4.0 (extracted from docfile)

388

Enhanced Windows Metafile

389

GEM

390

Mac PowerPoint 3.0

391

Mac PowerPoint 4.0

392

Harvard Graphics for Windows

393

IGES Drawing File Format

394

IBM Picture Interchange Format

395

X-Windows Bitmap

396

X-Windows Pixmap

397

CALS Raster File Format

398

Portable Network Graphics Format

399

X-Windows Dump

400

CorelDraw ClipArt

401

HP Gallery

402

Graphics Data Format

403

Micrografx Designer

404

Post Script

405

Microsoft PowerPoint 97-2004

406

Corel Draw 6.0

407

Corel Draw 7.0

408

PDF MacBinary Header

409

AutoCAD Drawing - Unknown Version

410

Visio 4.x

411

AutoCAD Drawing 14

412

PBM (Portable Bitmap)

413

PGM (Portable Graymap)

414

PPM (Portable Pixmap)

415

Adobe Photoshop

416

Microsoft PowerPoint Dual 95/97

417

Paint Shop Pro

418

Kodak FlashPix

419

Visio 5.x

420

Corel Draw 8.0

421

Visio 6.x

422

Corel Draw 9.0

423

Progressive JPEG

424

Microsoft PowerPoint 2000/2002

425

Bentley Microstation DGN

426

Windows 98/2000 Bitmap

427

Wireless Bitmap

428

MIFF Graphic

429

Microsoft PowerPoint 2

430

WordPerfect Graphic 10.0

431

Visio 3.x

432

Micrografx Designer

433

PDF Image

434

StarOffice 5.2 Impress

435

Adobe Illustrator 9

436

AutoCAD 2000/2002 Drawing

437

AutoCAD 2.5 Drawing

438

AutoCAD 2.6 Drawing

439

AutoCAD 9 Drawing

440

AutoCAD 10 Drawing

441

QuarkXPress 3.0 For Macintosh

442

QuarkXPress 3.1 For Macintosh

443

QuarkXPress 3.2 For Macintosh

444

QuarkXPress 3.3 For Macintosh

445

QuarkXPress 4.0 For Macintosh

446

QuarkXPress 3.3 For Windows

447

QuarkXPress 4.0 For Windows

448

QuarkXPress 5.0 For Windows

449

Export Image

450

StarOffice 6 & 7 Draw

451

StarOffice 6 & 7 Impress

452

JBIG2 Bitmap

453

Corel Draw 10.0

454

Corel Draw 11.0

455

Microsoft Visio 2003

456

StarOffice 8 Draw

457

StarOffice 8/Open Office 2.x Impress

458

AutoCAD 2004/2005/2006 Drawing

459

Microsoft PowerPoint 2007

460

Microsoft XML Paper Specification

461

Password Protected Microsoft Powerpoint 2007

462

AutoCAD 2007 Drawing

463

OS/2 v.2 Bitmap

464

StarView Metafile

465

eFax Document

475

DRM protected Microsoft Powerpoint

476

DRM protected Microsoft Powerpoint 2007

477

AutoDesk DWF

478

Corel Draw 12.0

479

JPEG 2000

480

Adobe Indesign

481

JPEG 2000 jpf Extension

482

JPEG 2000 mj2 Extension

483

WordPerfect Informs 1.0

484

Lotus Screen SnapShot

485

Lotus Screen Snapshot

486

Interchange Format

487

Microsoft Escher Graphics

488

Windows Sound

489

Windows Video

490

MIDI File

491

Macromedia Director

492

Macromedia Flash

493

Macromedia Flash

494

Quicktime Movie

495

MPEG Layer3 ID3 Ver 1.x

496

MPEG Layer3 ID3 Ver 2.x

497

ID3 Ver 1.x

498

ID3 Ver 2.x

499

MPEG-1 audio - Layer 3

500

MPEG-1 audio - Layer 1

501

MPEG-1 audio - Layer 2

502

MPEG-2 audio - Layer 1

503

MPEG-2 audio - Layer 2

504

MPEG-2 audio - Layer 3

505

Advanced Systems Format

506

Windows Media Video (ASF subtype)

507

Windows Media Audio (ASF subtype)

508

Microsoft Digital Video Recording (ASF subtype)

509

Real Media (both Real Audio and Real Video)

510

MPEG-1 video

511

MPEG-2 video

512

ISO Base Media File Format

513

MPEG-4 file

514

MPEG-7 file

515

EXE / DLL File

516

.COM File

517

.ZIP File

518

Self UnZIPping .EXE

519

.ARC File

520

MS Office Binder

521

UNIX Compress

522

UNIX Tar

523

Envoy

524

QuickFinder

525

Windows Clipboard File

526

Envoy 7

527

StuffIt

528

LZH Compress

529

Self-Extracting LZH

530

UNIX GZip

531

Java Class File

532

mbox(RFC-822 mailbox)

533

Lotus Notes Database R6.x

534

Generic Password Protected Microsoft Office 2007 Document

535

Microsoft Cabinet File

536

.RAR File

537

Self extracting RAR File

538

Microsoft InfoPath

549

Flexiondoc 1 (original) schema

550

Flexiondoc 2 schema

551

Flexiondoc 3 schema

552

Flexiondoc 4 schema

553

Flexiondoc 5 schema

554

Flexiondoc 5.1 schema

555

OASIS OpenDocument v1.0

556

Flexiondoc 5.2 schema

557

Domino XML schema

558

Adobe Indesign Interchange

559

XML Visio

560

Mail archive DXL

561

Mail message DXL

562

Generic DXL

564

AutoCAD DWG 2008

565

Publisher 2003

566

Publisher 2007

567

Open Office Impress 6

568

Open Office Impress 8

569

IBM Lotus Symphony Presentations

570

Open Office Draw 6

571

Open Office Draw 8

572

PowerPoint 2007 Template

573

PowerPoint 2007 Macro Enabled

574

PowerPoint 2007 Template Macro Enabled

575

PowerPoint 2007 Slideshow file

576

PowerPoint 2007 Template Macro Enabled

577

Oracle Multimedia internal raster format

578

TK thesaurus

579

TK abbrev

580

TK dictionary

581

TK quote

582

TK written word

583

TK culturelit

584

TK grammar

585

TK thessyn

586

Text - (ASCII)

587

Text - (Hex)

588

Text - (ANSI)

589

Text - (Unicode)

590

Text - (ASCII)

591

Text - (ANSI 8)

592

Text - Unknown format

593

Text - MAC - 7bit

594

Text - MAC - 8bit

595

Text - Japanese (ShiftJIS)

596

Text - Chinese (GB)

597

Text - Korean (Hangul)

598

Text - Chinese (Big 5)

599

Code page 852 - MS DOS Slavic

600

Text - Japanese (EUC)

601

Text - Hebrew (7-bit)

602

Text - Hebrew (IBM PC8)

603

Text - Hebrew (VAX E0)

604

Text - Hebrew (Windows ANSI 1255)

605

Text – Arabic 710

606

Text – Arabic 720

607

Text - Arabic (Windows ANSI 1256)

609

Text - Japanese (JIS)

610

Text - Central European

611

UTF-8 encoded Text

612

Text - U.S. English/Portuguese (EBCDIC 37)

613

Text - Austrian/German (EBCDIC 273)

614

Text - Danish/Norwegian (EBCDIC 277)

615

Text - Finnish/Swedish (EBCDIC 278)

616

Text - Italian (EBCDIC 280)

617

Text - Spanish (EBCDIC 284)

618

Text - U.K. English (EBCDIC 285)

619

Text - French (EBCDIC 297)

620

Text - Belgian/International (EBCDIC 500)

621

Text - Eastern European (EBCDIC 870)

622

Text - Icelandic (EBCDIC 871)

623

Text - Turkish (EBCDIC 1026)

624

HTML - U.S. English/Portuguese (EBCDIC 37)

625

HTML - Austrian/German (EBCDIC 273)

626

HTML - Danish/Norwegian (EBCDIC 277)

627

HTML - Finnish/Swedish (EBCDIC 278)

628

HTML - Italian (EBCDIC 280)

629

HTML - Spanish (EBCDIC 284)

630

HTML - U.K. English (EBCDIC 285)

631

HTML - French (EBCDIC 297)

632

HTML - Belgian/International (EBCDIC 500)

633

HTML - Eastern European (EBCDIC 870)

634

HTML - Icelandic (EBCDIC 871)

635

HTML - Turkish (EBCDIC 1026)

636

UUE Encoded Text

637

UUE Encoded Continued Part

638

XXE Encoded Text

639

XXE Encoded Continued Part

640

YEnc Encoded Text

641

YEnc Encoded Continued Part

642

BinHex Encoded Text

 

643

BinHex Encoded Continued Part

644

Text - Arabic (ASMO-708)

645

Text - Arabic (DOS OEM 720 TRANSPARENT ASMO)

646

Text - Arabic (ISO 8859-6)

 

647

Text - Arabic (Mac)

648

Text - Baltic (ISO 8859-4)

649

Text - Baltic (Windows ANSI 1257)

650

Text - Central European (DOS OEM 852 Latin II)

651

Text - Central European (ISO 8859-2)

652

Text - Central European (Mac)

653

Text - Central European (Windows ANSI 1250)

654

Text - Chinese Simplified (Windows ANSI 936 [GB2312])

655

Text - Chinese Traditional (Windows ANSI 950 [BIG5])

656

Text - Cyrillic (DOS OEM 855)

657

Text - Cyrillic (ISO 8859-5)

658

Text - Cyrillic (KOI8-R)

659

Text - Cyrillic (Mac)

660

Text - Cyrillic (Windows ANSI 1251)

661

Text - Greek (ISO 8859-7)

662

Text - Greek (Mac)

663

Text - Greek (Windows ANSI 1253)

664

Text - Hebrew (DOS OEM 862)

665

Text - Hebrew (ISO 8859-8)

666

Text - Japanese (Mac)

667

Text - Korean (Windows ANSI 1361 [Johab])

668

Text - Korean (Windows ANSI 949)

669

Text - Russian (DOS OEM 866)

670

Text - Thai (Windows ANSI 874)

671

Text - Turkish (DOS OEM 857)

672

Text - Turkish (ISO 8859-9)

673

Text - Turkish (Mac)

674

Text - Turkish (Windows ANSI 1254)

675

Text - Vietnamese (Windows ANSI 1258)

676

Text - Western European (ISO 8859-1)

677

Text - Western European (Mac)

678

Text - Western European (Windows ANSI 1252)

679

HTML - Arabic (ASMO-708)

680

HTML - Arabic (DOS OEM 720 TRANSPARENT ASMO)

681

HTML - Arabic (ISO 8859-6)

682

HTML - Arabic (Mac)

683

HTML - Arabic (Windows ANSI 1256)

684

HTML - Baltic (ISO 8859-4)

685

HTML - Baltic (Windows ANSI 1257)

686

HTML - Central European (DOS OEM 852 Latin II)

687

HTML - Central European (ISO 8859-2)

688

HTML - Central European (Mac)

689

HTML - Central European (Windows ANSI 1250)

690

HTML - Chinese Simplified (EUC)

691

HTML - Chinese Simplified (Windows ANSI 936 [GB2312])

692

HTML - Chinese Traditional (Windows ANSI 950 [BIG5])

693

HTML - Cyrillic (DOS OEM 855)

694

HTML - Cyrillic (ISO 8859-5)

695

HTML - Cyrillic (KOI8-R)

696

HTML - Cyrillic (Mac)

697

HTML - Cyrillic (Windows ANSI 1251)

698

HTML - Greek (ISO 8859-7)

699

HTML - Greek (Mac)

700

HTML - Greek (Windows ANSI 1253)

701

HTML - Hebrew (DOS OEM 862)

702

HTML - Hebrew (ISO 8859-8)

703

HTML - Hebrew (Windows ANSI 1255)

704

HTML - Japanese (Mac)

705

HTML - Japanese (Windows Shift-JIS ANSI 932)

706

HTML - Korean (Windows ANSI 1361 [Johab])

707

HTML - Korean (Windows ANSI 949)

708

HTML - Russian (DOS OEM 866)

709

HTML - Thai (Windows ANSI 874)

710

HTML - Turkish (DOS OEM 857)

711

HTML - Turkish (ISO 8859-9)

712

HTML - Turkish (Mac)

713

HTML - Turkish (Windows ANSI 1254)

714

HTML - Vietnamese (Windows ANSI 1258)

715

HTML - Western European (ISO 8859-1)

716

HTML - Western European (Mac)

717

HTML - Western European (Windows ANSI 1252)

718

Plugin

719

Text - Japanese (ShiftJIS)

720

Windows Metafile [5000]

721

WordPerfect Graphic [B]

722

Ami (internal bitmap)

723

Word (internal bitmap)

724

Mac PICT2 Binary

725

Windows Metafile [5005]

726

Windows Metafile [5006]

727

PerfectWorks Picture

728

WPG2 (internal bitmap)

729

Windows DIB

730

WPG1 (internal bitmap)

731

Embedded Bitmap

732

Embedded Bitmap

733

IAF (internal bitmap)

734

IAF (internal bitmap)

735

PICT (internal bitmap)

736

Export OCR data as Text, no formatting

737

Export OCR data as RTF, yes formatting

738

Export OCR data as HTML

739

EDRM export

753

Open Office 3.x Writer (ODF 1.2)

754

StarOffice 9 Writer (ODF 1.2)

755

Oracle Open Office 3.x Writer (ODF 1.2)

756

Samsung Jungum File

757

Kingsoft Office Writer File

758

Microsoft Word 2010

759

Microsoft Word 2010 Template

760

Microsoft Word 2010 Macro Enabled Document

761

Microsoft Word 2010 Macro Enabled Template

764

Microsoft Project 2010

765

Microsoft Excel XML 2003

766

Open Office 3.x Calc (ODF 1.2)

769

Microsoft Excel 2007 Excel Add-in Macro File

770

Lotus Data Interchange Format

771

StarOffice 9 Calc (ODF 1.2)

772

Oracle Open Office 3.x Calc (ODF 1.2)

773

Kingsoft Office Spreadsheet File

774

Corel Presentations X4

775

Microsoft Excel 2010 Macro Enabled Workbook

776

Microsoft Excel 2010 Template

777

Microsoft Excel 2010 Macro Enabled Template

784

Windows Media Player Playlist

786

Flexiondoc v5.4 (XML)

790

Open Office 3.x Impress (ODF 1.2)

791

Open Office 3.x Draw (ODF 1.2)

792

Corel Presentations X4

793

Microsoft Access Report Snapshot 2000 - 2003

794

StarOffice 9 Impress (ODF 1.2)

795

StarOffice 9 Draw (ODF 1.2)

796

Oracle Open Office 3.x Impress (ODF 1.2)

797

Oracle Open Office 3.x Draw (ODF 1.2)

798

Microsoft PowerPoint 2010

799

Microsoft PowerPoint 2010 Template

800

Microsoft PowerPoint 2010 Macro Enabled Template

801

Microsoft PowerPoint 2010 Slideshow

802

Microsoft PowerPoint 2010 Macro Enabled Presentation

803

Microsoft PowerPoint 2010 Macro Enabled Slideshow

805

Macromedia Flash 9

806

Macromedia Flash 10

807

Microsoft Windows Explorer Command File

808

7z Archive File

809

Trillian Text Log File

810

Trillian XML Log File

811

Microsoft Live Messenger Log File

812

AOL Messenger Log File

813

Windows Help File

814

Windows Compiled Help File

815

Windows shortcut

816

TrueType Font File

817

TrueType Font Collection File

818

TrueType (MAC) Font File

819

MS Outlook Appointment File

820

Outlook Appointment Form Template

821

MS Outlook Journal File

822

Outlook Journal Form Template

823

MS Outlook Contact File

824

Outlook Contact Form Template

825

MS Outlook Note File

826

Outlook Note Form Template

827

MS Outlook Task File

828

Outlook Task Form Template

829

Apple Mail 2.0 Message

830

Self extracting 7z Archive File

831

AutoCAD 2010/2011/2012 Drawing

832

Microsoft Access 2000/2002/2003

833

Microsoft Access 2007/2010

834

Microsoft Access Web Database

835

Microsoft Access 2007/2010 Template File

836

Outlook Non Delivery Report

837

Outlook Non Delivery Report Form Template

838

Outlook Post

839

Outlook Post Form Template

840

Outlook Distribution List

841

Outlook Distribution List Form Template

842

Outlook Clear Signed Email

843

Outlook Clear Signed Email Form Template

844

Outlook Opaque Signed Email

845

Outlook Opaque Signed Email Form Template

846

Apple iWork Pages File

847

Apple iWork Pages File Preview

848

S/MIME (Secure/MIME)

849

Clear Signed S/MIME (Secure/MIME)

850

Microsoft Word 2013

851

Microsoft Word 2013 Template

852

Microsoft Word 2013 Macro Enabled Document

853

Microsoft Word 2013 Macro Enabled Template

854

Quattro Pro Win X5

855

Apple iWork Numbers File

856

Apple iWork Numbers File Preview

857

Microsoft Excel XML 2007/2010

858

Microsoft Excel 2013 Workbook

859

Microsoft Excel 2013 Macro Enabled Workbook

860

Microsoft Excel 2013 Template

861

Microsoft Excel 2013 Macro Enabled Template

862

Microsoft Excel 2013 Excel Add-in Macro File

863

Microsoft Excel 2013 Binary

864

Microsoft OneNote Table of Contents File

865

Microsoft OneNote Package

866

Corel Presentations X5

867

Apple iWork Keynote File

868

Apple iWork Keynote File Preview

869

Scalable Vector Graphics File

870

AutoDesk DWF Archive File

871

Microsoft PowerPoint 2013

872

Microsoft PowerPoint 2013 Template

873

Microsoft PowerPoint 2013 Macro Enabled Template

874

Microsoft PowerPoint 2013 Slideshow

875

Microsoft PowerPoint 2013 Macro Enabled Presentation

876

Microsoft PowerPoint 2013 Macro Enabled Slideshow

877

Microsoft Office Theme File

878

Adobe Photoshop Large Document Format

879

Digital Imaging and Communications in Medicine (DICOM) File

913

Microsoft Word 2016

914

Microsoft Word 2016 Template

915

Microsoft Word 2016 Macro Enabled Document

916

Microsoft Word 2016 Macro Enabled Template

917

Microsoft PowerPoint 2016

918

Microsoft PowerPoint 2016 Template

919

Microsoft PowerPoint 2016 Macro Enabled Template

920

Microsoft PowerPoint 2016 Slideshow

921

Microsoft PowerPoint 2016 Macro Enabled Presentation

922

Microsoft PowerPoint 2016 Macro Enabled Slideshow

923

Microsoft Excel 2016 Workbook

924

Microsoft Excel 2016 Macro Enabled Workbook

925

Microsoft Excel 2016 Template

926

Microsoft Excel 2016 Macro Enabled Template

927

Microsoft Excel 2016 Excel Add-in Macro File

928

Microsoft Excel 2016 Binary