ClusterXL Monitoring Commands

Description

Use the monitoring commands to make sure that the cluster and the Cluster Members work properly, and to define Critical Devices. A Critical Device (also known as a Problem Notification, or pnote) is a special software device on each Cluster Member, through which the critical aspects for cluster operation are monitored. When the critical monitored component on a Cluster Member fails to report its state on time, or when its state is reported as problematic, the state of that member is immediately changed to 'Down'.

Syntax

Notes:

• In Gaia Clish:

  Enter the show cluster<ESC><ESC> to see all the available commands.

• In Expert mode:

  Run the cphaprob command see all the available commands.

  You can run the cphaprob commands from Gaia Clish as well.

• Syntax legend:
  1. Curly brackets or braces {}:

     Enclose a list of available commands or parameters, separated by the vertical bar |, from which user can enter only one.

  2. Angle brackets <>:

     Enclose a variable - a supported value user needs to specify explicitly.

  3. Square brackets or brackets []:

     Enclose an optional command or parameter, which user can also enter.

• You can include these commands in scripts to run them automatically.

  The meaning of each command is explained in the next sections.

  Description of Command	Command in Gaia Clish	Command in Expert Mode
  Show states of Cluster Members and their names	show cluster state	cphaprob [-vs <VSID>] state
  Show Critical Devices (Pnotes) and their states on the Cluster Member	show cluster members pnotes all problem	cphaprob [-l] [-ia] [-e] list
  Show cluster interfaces on the cluster member	show cluster members interfaces all secured virtual vlans	cphaprob [-vs all] [-a][-m] if
  Show cluster bond configuration on the Cluster Member	show cluster bond all name <bond_name>	cphaprob show_bond [<bond_name>]
  Show groups of bonds on the Cluster Member	N / A	cphaprob show_bond_groups
  Show (and reset) cluster failover statistics on the Cluster Member	show cluster failover [reset {count | history}]	cphaprob [-reset {-c | -h}] [-l <count>] show_failover
  Show configuration of MAC Magic and MAC Forward Magic on the Cluster Member	show cluster mmagic	cphaprob [-vs <VSID>] [-k] mmagic
  Show Delta Sync statistics on the Cluster Member	show cluster statistics sync [reset]	cphaprob [-reset] syncstat
  Show Delta Sync statistics for the Connections table on the Cluster Member	show cluster statistics transport [reset]	cphaprob [-reset] ldstat
  Show the Cluster Control Protocol (CCP) mode on the Cluster Member	show cluster members interfaces virtual	cphaprob [-vs all] -a if
  Show the IGMP membership of the Cluster Member	show cluster members igmp	cphaprob igmp
  Show cluster unique IP's table on the Cluster Member	show cluster members ips	cphaprob tablestat
  Show the Cluster Member ID Mode in local logs - by Member ID (default) or Member Name.	show cluster members idmode	cphaprob names
  Show interfaces, which the RouteD monitors on the Cluster Member when you configure OSPF	show ospf interfaces [detailed]	cphaprob routedifcs
  Show roles of RouteD daemon on Cluster Members	show cluster roles	cphaprob roles
  Show Cluster Correction Statistics	N / A	cphaprob corr cphaprob -c {a | d |f}
  Show the Cluster Control Protocol CCP) mode	show cluster members interfaces virtual	cphaprob -a if
  Show the Cluster Control Protocol CCP) Encryption settings	show cluster members ccpenc	cphaprob ccp_encrypt

List of the Gaia Clish show cluster commands

show cluster bond all name <Name of Bond> failover [reset {count | history}] members ccpenc idmode igmp interfaces all secured virtual vlans ips pnotes all problem mmagic roles state statistics sync [reset] transport [reset]

List of the cphaprob commands

Note - Some commands are not applicable to 3rd party clusters.

cphaprob [-vs <VSID>] state cphaprob [-reset {-c | -h}] [-l <count>] show_failover cphaprob [-vs <VSID>][-k][-S] mmagic cphaprob names cphaprob [-reset] [-a] syncstat cphaprob [-reset] ldstat cphaprob [-l] [-i[a]] [-e] list cphaprob [-vs all] [-a] [-m] if cphaprob show_bond [<bond_name>] cphaprob show_bond_groups cphaprob igmp cphaprob tablestat cphaprob routedifcs cphaprob roles cphaprob {corr | -c {a | d |f}} cphaprob ccp_encrypt