|
|
|
Description
Blocks all connections to, from, and through the Security Gateway.
Important - The fw ctl block on command immediately blocks all connections without a prompt and regardless the currently installed policy. To unblock the connections, you must either reboot the Security Gateway, or connect to the Security Gateway over a serial console (or LOM card) and run the fw ctl block off command.
Syntax
fw [-d] ctl block off on |
Parameters
Parameter |
Description |
|---|---|
|
Runs the command in debug mode. Use only if you troubleshoot the command itself. |
|
Removes the block of all connections. |
|
Blocks all connections. |
