Description
Instructs the VPN daemon vpnd
to write debug messages to the $FWDIR/log/vpnd.elg*
and $FWDIR/log/ike.elg*
log files.
Debugging of the VPN daemon takes place according to Debug Topics and Debug Levels:
For example, if the Debug Topic is LDAP
, all traffic between the VPN daemon and the LDAP server is written to the log file.
Check Point Support provides the specific Debug Topics when needed.
For more information, see sk89940: How to debug VPND daemon.
Syntax
|
Parameters
Parameter |
Description |
---|---|
No Parameters |
Shows the built-in usage. |
|
Turns on high level VPN debug. Information is written in the |
|
Specifies the Debug Topic and the Debug Level. Best Practice - Run this command to start the debug:
|
|
Turns off all VPN debug. Best Practice - Run one of these commands to stop the VPND debug:
|
|
Turns on the IKE debug. Information is written in the You can specify the size of the |
|
Turns off IKE debug. Run this command to stop the IKE debug:
|
or
|
This command:
Run this command to start the debug:
|
|
Stops the VPND daemon debug. Run one of these commands to stop the VPND debug:
|
|
Enables the timestamp in the log files. Prints one timestamp after the specified number of seconds. By default, prints the timestamp every 10 seconds. |
|
Disables the timestamp in the log files every number of seconds. |
|
Logs failed IKE negotiations. You can specify the size of the |
|
Enables the IKE Monitor. Saves the IKE packets in the Warning - The output file may contain user X-Auth passwords. Make sure the file is protected. |
|
Disables the IKE Monitor. |
|
Saves the specified text string in the For example, run: Notes:
|
|
This command:
|
Return Values