cpwd_admin config

-h

-a <Configuration_Parameter_1>=<Value_1> <Configuration_Parameter_2>=<Value_2> ... <Configuration_Parameter_N>=<Value_N>

-d <Configuration_Parameter_1> <Configuration_Parameter_2> ... <Configuration_Parameter_N>

-p

-r

-h

Shows built-in usage.

-a <Configuration_Parameter_1>=<Value_1> <Configuration_Parameter_2>=<Value_2> ... <Configuration_Parameter_N>=<Value_N>

Adds the WatchDog configuration parameters.

Note - Spaces are not allowed between the name of the configuration parameter and its value.

-d <Configuration_Parameter_1> <Configuration_Parameter_2> ... <Configuration_Parameter_N>

Deletes the WatchDog configuration parameters that user added with the cpwd_admin config -a command.

-p

Shows the WatchDog configuration parameters that user added with the cpwd_admin config -a command.

-r

Restores the default WatchDog configuration.

Configuration Parameter

Accepted Values

Description

default_ctx

Text string up to 128 characters

On VSX Gateway, configures the CTX value that is assigned to monitored processes, for which no CTX is specified.

display_ctx

• 0 (default)
• 1

On VSX Gateway, configures whether the WatchDog shows the CTX column in the output of the cpwd_admin list command (between the APP and the PID columns):

• 0 - Does not show the CTX column
• 1 - Shows the CTX column

no_limit

• Range: -1, 0, >0
• Default: 5

If rerun_mode=1, specifies the maximal number of times the WatchDog tries to restart a process.

• -1 - Always tries to restart
• 0 - Never tries to restart
• >0 - Tries this number of times

num_of_procs

• Range: 30 - 2000
• Default: 2000

Configures the maximal number of processes managed by the WatchDog.

rerun_mode

• 0
• 1 (default)

Configures whether the WatchDog restarts processes after they fail:

• 0 - Does not restart a failed process. Monitor and log only.
• 1 - Restarts a failed process (this is the default).

reset_startups

• Range: > 0
• Default: 3600

Configures the time (in seconds) the WatchDog waits after the process starts and before the WatchDog resets the process's startup_counter to 0.

To see the process's startup counter, in the output of the cpwd_admin list command, refer to the #START column.

sleep_mode

• 0
• 1 (default)

Configures how the WatchDog restarts the process:

• 0 - Ignores timeout and restarts the process immediately
• 1 - Waits for the duration of sleep_timeout

sleep_timeout

• Range: 0 - 3600
• Default: 60

If rerun_mode=1, specifies how much time (in seconds) passes from a process failure until WatchDog tries to restart it.

stop_timeout

• Range: > 0
• Default: 60

Configures the time (in seconds) the WatchDog waits for a process stop command to complete.

zero_timeout

• Range: > 0
• Default: 7200

After failing no_limit times to restart a process, the WatchDog waits zero_timeout seconds before it tries again.

The value of the zero_timeout must be greater than the value of the timeout.

("CheckPoint Repository Set"

: (SOFTWARE

: (CheckPoint

: (CPshared

:CurrentVersion (6.0)

: (6.0

... ...

: (reserved

... ...

: (Wd

: (Wd_Config

:Configuration_Parameter_1 ("[4]Value_1")

:Configuration_Parameter_2 ("[4]Value_2")

)

)

... ...

[Expert@HostName:0]# cpwd_admin config -p

cpWatchDog doesn't have configuration parameters

[Expert@HostName:0]#

[Expert@HostName:0]# cpwd_admin config -a sleep_timeout=120 no_limit=12

[Expert@HostName:0]#

[Expert@HostName:0]# cpwd_admin config -p

cpWatchDog Configuration parameters are:

sleep_timeout : 120

no_limit : 12

[Expert@HostName:0]#

[Expert@HostName:0]# cpstop ; cpstart

[Expert@HostName:0]#

[Expert@HostName:0]# cpwd_admin config -r

cpWatchDog doesn't have configuration parameters

[Expert@HostName:0]#

[Expert@HostName:0]# cpstop ; cpstart

[Expert@HostName:0]#

[Expert@HostName:0]# cpwd_admin config -p

cpWatchDog doesn't have configuration parameters

[Expert@HostName:0]#