Module 'cluster' (ClusterXL)

Syntax: fw ctl debug -m cluster + {all | <List of Debug Flags>}

Notes:

To print all synchronization operations in Check Point cluster in the debug output, enable these debug flags:
- The 'sync' debug flag in the debug module 'fw'
- The 'sync' debug flag in the debug module 'CPAS'
To print the contents of the packets in HEX format in the debug output (as "FW-1: fwha_print_packet: Buffer ..."), before you start the kernel debug, set this kernel parameter on each Cluster Member:
# fw ctl set int fwha_dprint_io 1
To print all network checks in the debug output, before you start the kernel debug, set this kernel parameter on each Cluster Member:
# fw ctl set int fwha_dprint_all_net_check 1

Flag	Description
`arp`	ARP Forwarding (see sk111956)
`autoccp`	Operations of CCP in Auto mode
`ccp`	Reception and transmission of Cluster Control Protocol (CCP) packets
`cloud`	Replies to the probe packets in CloudGuard IaaS
`conf`	Cluster configuration and policy installation
`correction`	Correction Layer
`cu`	Connectivity Upgrade (see sk107042)
`drop`	Connections dropped by the cluster Decision Function (DF) module (does not include CCP packets)
`forward`	Forwarding Layer messages (when Cluster Members send and receive a forwarded packet)
`if`	Interface tracking and validation (all the operations and checks on interfaces)
`ifstate`	Interface state (all the operations and checks on interfaces)
`io`	Information about sending of packets through cluster interfaces
`log`	Creating and sending of logs by cluster Also enable the debug flag '`log`' flag in the debug module '`fw`'
`mac`	Current configuration of and detection of cluster interfaces Also enable the debug flags '`conf`' and '`if`' in this debug module
`mmagic`	Operations on "MAC magic" (getting, setting, updating, initializing, dropping, and so on)
`msg`	Handling of internal messages between Cluster Members
`pivot`	Operation of ClusterXL in Load Sharing Unicast mode (Pivot mode)
`pnote`	Registration and monitoring of Critical Devices (pnotes)
`select`	Packet selection (includes the Decision Function)
`stat`	States of cluster members (state machine)
`subs`	Subscriber module (set of APIs, which enable user space processes to be aware of the current state of the ClusterXL state machine and other clustering configuration parameters)
`timer`	Reports of cluster internal timers
`trap`	Sending trap messages from the cluster kernel to the RouteD daemon about Master change