Installing a Multi-Domain Log Server

1

Install the Gaia Operating System:

• Installing the Gaia Operating System on a Check Point Appliance
• Installing the Gaia Operating System on an Open Server

2

Run the Gaia First Time Configuration Wizard.

3

During the First Time Configuration Wizard, you must configure these settings:

• In the Installation Type window, select Multi-Domain Server.
• In the Installation Type window, select Multi-Domain Log Server.
• In the Leading VIP Interfaces Configuration window, select the applicable interface.
• In the Secure Internal Communication window, enter the desired Activation Key (between 4 and 127 characters long).

1

Connect with SmartConsole to the Primary Multi-Domain Server - the MDS context.

2

From the left navigation panel, click Multi Domain > Domains.

3

From the top toolbar, click New > Multi-Domain Log Server.

4

Enter the desired object name.

5

Click the General page.

6

In the Basic Details section:

1. Enter the applicable IPv4 address.
2. Click Connect.

7

Enter the same Activation Key you entered during the First Time Configuration Wizard of the Multi-Domain Log Server.

8

Click OK.

9

In the Platform section:

• In the OS field, select Gaia
• In the Version field, select R80.20
• In the Hardware field, select the applicable option

10

Click the Multi-Domain page.

11

Configure the desired settings.

12

Click the Log Settings > General page.

13

Configure the desired settings.

14

Click the Log Settings > Advanced Settings page.

15

Configure the desired settings.

16

Click OK.