Configuring the IP Address of the Gaia Management Interface

The Gaia Management Interface is pre-configured with the IP address 192.168.1.1. You can change this IP address during or after you run the Gaia First Time Configuration Wizard. If you must access the Gaia computer over the network, assign the applicable IP address to that interface before you connect the Gaia computer to the network.

If you change the IP address of the Gaia Management Interface during the First Time Configuration Wizard, this warning shows:

Your IP address has been changed. In order to maintain the browser connection, the old IP address will be retained as a secondary IP address.

You can change the IP address of the Gaia Management Interface after you run the Gaia First Time Configuration Wizard.

• In Gaia Portal:

  Step	Description
  1	In your web browser, connect the Gaia Portal to the current IP address of the Gaia management interface: https://<IP Address of Gaia Management Interface>
  2	In the left navigation tree, go to Network Management > Network Interfaces.
  3	In the Management Interface section, click Set Management Interface.
  4	Select the desired interface.
  5	Click OK.
  6	In the Interfaces section, select the Management Interface and click Edit.
  7	Assign the applicable IP address.
  8	Click OK.

• In Gaia Clish:

  Step	Description
  1	Connect to the command line on the Gaia computer. Over SSH to the current IP address of the Gaia Management Interface Over a console
  2	Log in to Gaia Clish.
  3	Get the name of the current Gaia Management Interface: show management interface
  4	Select another Gaia Management Interface: set management interface <Interface Name>
  5	Assign another IP address to the Gaia Management Interface: set interface <Interface Name> ipv4-address <IPv4 address> subnet-mask <Mask>
  6	Save the changes in the Gaia database: save config

For more information:

See the R80.20 Gaia Administration Guide.