Viewing the Cluster Control Protocol (CCP) Settings

Description

This command lets you see the Cluster Control Protocol (CCP) mode on the Cluster Members.

Syntax

Shell	Command
Gaia Clish	`show cluster members interfaces virtual`
Expert mode	`cphaprob -a if`

Example

[Expert@Member2:0]# cphaprob -a if

CCP mode: Automatic

Required interfaces: 3

Required secured interfaces: 1

eth0 UP non sync(non secured), multicast

eth1 UP sync(secured), unicast

eth2 UP non sync(non secured), multicast

Virtual cluster interfaces: 2

eth0 192.168.3.55 VMAC address: 00:1C:7F:00:36:70

eth2 192.250.3.55 VMAC address: 00:1C:7F:00:36:70

[Expert@Member2:0]#