Reboot

This command reboots the gateway. Note that this command utilizes CPRID, therefore CPRID services must run on the gateway. Applicable to SmartLSM Security Gateways, UTM-1 Edge devices and Security Gateways.

Usage

LSMcli [-d] <server> <user> <pswd> Reboot <Robo|Gateway>

Parameters

Reboot Parameters

Parameter	Description
`server`	Name/IP address of the Security Management Server or Domain Management Server
`user`	User name of standard Check Point authentication method
`pswd`	Password of standard Check Point authentication method
`Robo` or `Gateway`	Name of the SmartLSM Security Gateway, UTM-1 Edge devices, or standard Security Gateway

Example

LSMcli mySrvr name pass Reboot MyRobo