Start

This command starts Security Gateway services on the selected gateway. Note that this command utilizes CPRID, therefore CPRID services must be running on the gateway. Applicable to Security Gateways and SmartLSM Security Gateways.

Usage

LSMcli [-d] <server> <user> <pswd> Start <Robo|Gateway>

Parameters

Start Parameters

Parameter	Description
`server`	Name/IP address of the Security Management Server or Domain Management Server
`user`	User name of standard Check Point authentication method
`pswd`	Password of standard Check Point authentication method
`Robo` or `Gateway`	Name of the SmartLSM Security Gateway or standard Security Gateway

Example

LSMcli mySrvr name pass Start MyRobo