VerifyUpgrade

This command verifies if you can upgrade a selected software on the SmartLSM Security Gateway. Note that this command does not perform an installation. Run this command before using the upgrade command. Applicable to SmartLSM Security Gateways only.

Usage

LSMcli [-d] <server> <user> <pswd> VerifyUpgrade <RoboName>

Parameters

VerifyUpgrade Parameters

Parameter	Description
server	Name/IP address of the Security Management Server or Domain Management Server
user	User name of standard Check Point authentication method
pswd	Password of standard Check Point authentication method
RoboName	Name of the SmartLSM Security Gateway

Example

LSMcli mySrvr name pass VerifyUpgrade MyRobo