mdsstat

Description

The mdsstat shows the status of processes on the Multi-Domain Server and Domain Management Servers.

Syntax

mdsstat [-h] [-m] [<Name or IP Address of Domain Management Server>]

Parameters

Parameter	Description
`-h`	Displays help message.
`-m`	Test status for Multi-Domain Server only.
`<`Name or IP address of Domain Management Server`>`	Specifies the Domain Management Server by its name or IPv4 address.

Possible Statuses of Processes

Status	Description
`up`	The process is up.
`down`	The process is down.
`pnd`	The process is pending initialization.
`init`	The process is initializing.
`N/A`	The process's PID is not yet available.
`N/R`	The process is not relevant for this Multi-Domain Server.

Example

# mdsstat

+--------------------------------------------------------------------------------------+

| Processes status checking |

+-----+----------------+-----------------+------------+----------+----------+----------+

| Type| Name | IP address | FWM | FWD | CPD | CPCA |

+-----+----------------+-----------------+------------+----------+----------+----------+

| MDS | - | 192.168.3.101 | up 17284 | up 17266 | up 17251 | up 17753 |

+-----+----------------+-----------------+------------+----------+----------+----------+

| CMA |DOM211_Server | 192.168.3.211 | up 32227 | up 32212 | up 25725 | up 32482 |

| CMA |DOM212_Server | 192.168.3.212 | up 4248 | up 4184 | up 4094 | up 4441 |

+-----+----------------+-----------------+------------+----------+----------+----------+

| Total Domain Management Servers checked: 2 2 up 0 down |

| Tip: Run mdsstat -h for legend |

+--------------------------------------------------------------------------------------+