/proc/ppk/stats

Description

Contains the IRQ numbers and names of interfaces the SecureXLClosed Check Point product on a Security Gateway that accelerates IPv4 and IPv6 traffic that passes through a Security Gateway. uses.

Important - You must run the applicable commands in the Expert mode on the applicable Security GroupClosed A logical group of Security Appliances that provides Active/Active cluster functionality. A Security Group can contain one or more Security Appliances. Security Groups work separately and independently from each other. To the production networks, a Security Group appears a single Security Gateway. Every Security Group contains: (A) Applicable Uplink ports, to which your production networks are connected; (B) Security Appliances (the Quantum Maestro Orchestrator determines the applicable Downlink ports automatically); (C) Applicable management port, to which the Check Point Management Server is connected..

Syntax for IPv4

g_ls -lR /proc/ppk/

g_cat /proc/ppk/stats

Syntax for IPv6

g_ls -lR /proc/ppk6/

g_cat /proc/ppk6/stats

Example for IPv4

[Expert@MyChassis-ch0x-0x:0]# g_cat /proc/ppk/stats
IRQ | Interface
---------------------------
 18   eth0
 16   eth1
 17   eth2
 18   eth3
 19   eth4
[Expert@MyChassis-ch0x-0x:0]#