/proc/ppk/mcast_statistics

Description

Contains SecureXLClosed Check Point product on a Security Gateway that accelerates IPv4 and IPv6 traffic that passes through a Security Gateway. statistics for multicast traffic.

Note - This is the same information that the "fwaccel stats -m" command shows (see fwaccel stats).

Important - You must run the applicable commands in the Expert mode on the applicable Security GroupClosed A logical group of Security Appliances that provides Active/Active cluster functionality. A Security Group can contain one or more Security Appliances. Security Groups work separately and independently from each other. To the production networks, a Security Group appears a single Security Gateway. Every Security Group contains: (A) Applicable Uplink ports, to which your production networks are connected; (B) Security Appliances (the Quantum Maestro Orchestrator determines the applicable Downlink ports automatically); (C) Applicable management port, to which the Check Point Management Server is connected..

Syntax for IPv4

g_ls -lR /proc/ppk/

g_cat /proc/ppk/mcast_statistics

g_cat /proc/ppk/<SecureXL Instance ID>/mcast_statistics

Syntax for IPv6

g_ls -lR /proc/ppk6/

g_cat /proc/ppk6/mcast_statistics

g_cat /proc/ppk6/<SecureXL Instance ID>/mcast_statistics

Example for IPv4

[Expert@MyChassis-ch0x-0x:0]# g_cat /proc/ppk/mcast_statistics
Name                  Value              Name                  Value
--------------------  ---------------    --------------------  ---------------
in packets                      10100    out packets                         0
if restricted                       0    conns with down if                  0
f2f packets                         0    f2f bytes                           0
dropped packets                     0    dropped bytes                       0
accel packets                       0    accel bytes                         0
mcast conns                         0
[Expert@MyChassis-ch0x-0x:0]#