/proc/ppk/conns

Description

Contains the list of the SecureXLClosed Check Point product on a Security Gateway that accelerates IPv4 and IPv6 traffic that passes through a Security Gateway. connections.

Important - This file is for future use. Refer to the fwaccel conns command.

Important - You must run the applicable commands in the Expert mode on the applicable Security GroupClosed A logical group of Security Appliances that provides Active/Active cluster functionality. A Security Group can contain one or more Security Appliances. Security Groups work separately and independently from each other. To the production networks, a Security Group appears a single Security Gateway. Every Security Group contains: (A) Applicable Uplink ports, to which your production networks are connected; (B) Security Appliances (the Quantum Maestro Orchestrator determines the applicable Downlink ports automatically); (C) Applicable management port, to which the Check Point Management Server is connected..

Syntax for IPv4

g_ls -lR /proc/ppk/

g_cat /proc/ppk/conns

g_cat /proc/ppk/<SecureXL Instance ID>/conns

Syntax for IPv6

g_ls -lR /proc/ppk6/

g_cat /proc/ppk6/conns

g_cat /proc/ppk6/<SecureXL Instance ID>/conns