Working with System Configuration in Gaia Clish

You can save your GaiaClosed Check Point security operating system that combines the strengths of both SecurePlatform and IPSO operating systems. configuration settings as a ready-to-run CLI shell script.

This feature lets you quickly restore your system configuration after a system failure or migration.

Note - You must run these commands in Gaia gClishClosed The name of the global command line shell in Check Point Gaia operating system for Security Appliances connected to Check Point Quantum Maestro Orchestrators. Commands you run in this shell apply to all Security Appliances in the Security Group. of the applicable Security GroupClosed A logical group of Security Appliances that provides Active/Active cluster functionality. A Security Group can contain one or more Security Appliances. Security Groups work separately and independently from each other. To the production networks, a Security Group appears a single Security Gateway. Every Security Group contains: (A) Applicable Uplink ports, to which your production networks are connected; (B) Security Appliances (the Quantum Maestro Orchestrator determines the applicable Downlink ports automatically); (C) Applicable management port, to which the Check Point Management Server is connected..

Syntax

save configuration <Name of Script>

load configuration <Name of Script>

show configuration

This example shows part of the configuration settings as last saved to a CLI shell script:

[Global] MyChassis-ch01-01 > show configuration
# 
# Configuration of MyChassis 
# Language version: 10.0v1 
# 
# Exported by admin on Mon Mar 19 15:06:22 2012 
# 
set hostname MyChassis 
set timezone Asia / Jerusalem 
set password-controls min-password-length 6 
set password-controls complexity 2 
set password-controls palindrome-check true 
set password-controls history-checking true 
set password-controls history-length 10 
set password-controls password-expiration never 
set ntp active off 
set router-id 6.6.6.103 
set ipv6-state off 
set snmp agent off 
set snmp agent-version any 
set snmp community public read-only 
set snmp traps trap authorizationError disable 
set snmp traps trap coldStart disable 
set snmp traps trap configurationChange disable 
... ... ...[truncated for brevity]... ... ... 
[Global] MyChassis-ch01-01 >