Configuring Job Scheduler in Gaia Portal

Note - You must connect to the Gaia PortalClosed Web interface for the Check Point Gaia operating system. of the applicable Security GroupClosed A logical group of Security Appliances that provides Active/Active cluster functionality. A Security Group can contain one or more Security Appliances. Security Groups work separately and independently from each other. To the production networks, a Security Group appears a single Security Gateway. Every Security Group contains: (A) Applicable Uplink ports, to which your production networks are connected; (B) Security Appliances (the Quantum Maestro Orchestrator determines the applicable Downlink ports automatically); (C) Applicable management port, to which the Check Point Management Server is connected..

Step

Instructions

1

In the navigation tree, click System Management > Job Scheduler.

2

Click Add.

The Add A New Scheduled Job window opens.

3

In the Job Name, enter the name of the job.

Use alphanumeric characters only, and no spaces.

4

In the Command to Run, enter the name of the command.

The command must be a UNIX command.

Note - If you wish to run a Check Point command, then use this syntax (see sk90441):

source /etc/profile.d/CP.sh ; <your command>

5

Below the Schedule, select the frequency (Daily, Weekly, Monthly, At startup) for this job.

Where applicable, enter the Time of day for the job, in the 24-hour clock format (HH:MM).

6

Click OK.

The job shows in the Scheduled Jobs table.

7

In the E-mail Notification, enter the e-mail address, to which GaiaClosed Check Point security operating system that combines the strengths of both SecurePlatform and IPSO operating systems. should send the notifications.

Note - You must also configure a Mail Server (see Mail Notification).

8

Click Apply.

Step

Instructions

1

In the navigation tree, click System Management > Job Scheduler.

2

In the Scheduled Jobs table, select the job to delete.

3

Click Delete.

4

Click OK to confirm.

(Click Cancel to abort.)

Step

Instructions

1

In the navigation tree, click System Management > Job Scheduler.

2

In the scheduled Jobs table, select the job to edit.

3

Click Edit.

The Edit Scheduled Job opens.

4

Enter the changes.

5

Click OK.