Module 'cluster' (ClusterXL)

Syntax: g_fw ctl debug -m cluster + {all | <List of Debug Flags>}

Notes:

To print all synchronization operations in Check Point cluster Two or more Security Gateways that work together in a redundant configuration - High Availability, or Load Sharing. in the debug output, enable these debug flags:
- The 'sync' debug flag in the debug Module 'fw' (Firewall)Module 'fw' (Firewall)Module 'fw' (Firewall)
- The 'sync' debug flag in the debug Module 'CPAS' (Check Point Active Streaming)Module 'CPAS' (Check Point Active Streaming)Module 'CPAS' (Check Point Active Streaming)
To print the contents of the packets in HEX format in the debug output (as "FW-1: fwha_print_packet: Buffer ..."), before you start the kernel debug, set this kernel parameter:

g_fw ctl set int fwha_dprint_io 1
To print all network checks in the debug output, before you start the kernel debug, set this kernel parameter:

g_fw ctl set int fwha_dprint_all_net_check 1

Flag	Description
`arp`	ARP Forwarding (see sk111956)
`autoccp`	Operations of CCP in Auto mode
`ccp`	Reception and transmission of Cluster Control Protocol (CCP) packets
`cloud`	Replies to the probe packets in CloudGuard IaaS
`conf`	Cluster configuration and policy installation
`correction`	Correction Layer
`cu`	Connectivity Upgrade (see sk107042)
`drop`	Connections dropped by the cluster Decision Function (DF) module (does not include CCP packets)
`forward`	Forwarding Layer messages (when Cluster Members send and receive a forwarded packet)
`if`	Interface tracking and validation (all the operations and checks on interfaces)
`ifstate`	Interface state (all the operations and checks on interfaces)
`io`	Information about sending of packets through cluster interfaces
`log`	Creating and sending of logs by cluster Also enable the debug flag '`log`' flag in the debug Module 'fw' (Firewall)`Module 'fw' (Firewall)`Module 'fw' (Firewall)
`mac`	Current configuration of and detection of cluster interfaces Also enable the debug flags '`conf`' and '`if`' in this debug module
`mmagic`	Operations on "MAC magic" (getting, setting, updating, initializing, dropping, and so on)
`msg`	Handling of internal messages between Cluster Members
`pivot`	Operation of ClusterXL in Load Sharing Unicast mode (Pivot mode)
`pnote`	Registration and monitoring of Critical Devices (pnotes)
`select`	Packet selection (includes the Decision Function)
`stat`	States of cluster members (state machine)
`subs`	Subscriber module (set of APIs, which enable user space processes to be aware of the current state of the ClusterXL state machine and other clustering configuration parameters)
`timer`	Reports of cluster internal timers
`trap`	Sending trap messages from the cluster kernel to the RouteD daemon about Master change