fw ctl multik prioq

Description

Configures the CoreXL Firewall Priority Queues. For more information, see sk105762.

Important - This command saves the configuration in the $FWDIR/conf/dispatcher_bypass.conf file. You must not edit this file manually.

Important:

The same CoreXL command must run on all Security Group Members.

Therefore, you must run the CoreXL commands in either Gaia gClish, or Expert mode.

In Gaia gClish, run the "fw ctl ..." and "fw6 ctl ..." commands.
In the Expert mode, run the "g_fw ctl ..." and "g_fw6 ctl ..." commands.

Syntax for IPv4

fw ctl multik prioq [{0 | 1 | 2}]

Syntax for IPv6

fw6 ctl multik prioq [{0 | 1 | 2}]

Parameters

Parameter	Description
No Parameters	Shows the interactive menu for configuration of the CoreXL Firewall Priority Queues.
`0`	Disables the CoreXL Firewall Priority Queues.
`1`	Enables the CoreXL Firewall Priority Queues.
`2`	Enables the CoreXL Firewall Priority Queues in the Eviluator-only mode (evaluation of "evil" connections).

Example

[Expert@MyChassis-ch0x-0x:0]# g_fw ctl multik prioq
Current mode is Off
 
Available modes:
0.      Off
1.      Eviluator-only
2.      On
 
Choose the desired mode number: (or 3 to Quit)
[Expert@MyChassis-ch0x-0x:0]#