vsx_util convert_cluster

*************************************************

Note: the operation you are about to perform changes the information in the
management database. Back up the database before continuing.

*************************************************

Enter Security Management Server/main Domain Management Server IP address
(Hit 'ENTER' for 'localhost'):

Enter Administrator Name:

Enter Administrator Password:

Select VSX cluster object name:

1) vsx_cluster_A

2) vsx_cluster_B

Select: 1

Enter desired ClusterXL mode: HA-High Availability, LS-Load Sharing
(HA | LS): LS

All modules must be in the 'Per VS aState' mode to conclude this operation
successfully. Use the command cpconfig on each module to verify compliance
before continuing with the operation.

When converting a cluster, there are two options for distributing the
existing Virtual System(s) among cluster members:

1. Distribute all Virtual Systems so that each cluster member is equally loaded.

2. Set all Virtual Systems as Active on the same cluster member.

After converting the cluster, the command vsx_util redistribute_vsls may
be used to modify Virtual System distribution.

Enter distribution option (1-2) [1]: 1

Converting the cluster to ClusterXL Load Sharing mode...

The cluster was successfully converted to ClusterXL Load Sharing mode

Installing new policy...

...

Policy installation finished successfully.