Installing Security Gateways on Open Servers

This procedure explains how to install a Security Gateway in a distributed deployment after you install the Operating System.

To install a Security Gateway on Gaia:

1. In your web browser, connect to the Gaia Portal:

   https://<Gaia management IP address>

2. In the Gaia Portal window, log in with the administrator name and password that you defined during the Gaia installation.
3. The First Time Configuration Wizard opens.
4. Click Next.
5. Select Continue with R80.10 configuration, and click Next.
6. Configure the Management Connection.

   Optional: Configure an Internet Connection.

7. Enter the Device information:
   • Host Name
   • Domain Name
   • Primary DNS Server
   • Secondary DNS Server
   • Tertiary DNS Server
   • Proxy Settings
8. Configure the Date and Time Settings.
9. For the Installation Type, select only Security Gateway.

   Optional: If you configure a cluster:

   • Select Unit is a part of a cluster
   • Select only ClusterXL

   Click Next.

10. Answer no to the Dynamically Assigned IP question.
11. Define the Secure Internal Communication (SIC) Activation Key that you will use later in the VSX Gateway object in SmartConsole.
12. The Summary window shows the selected settings for the system.
13. Click Finish.