Host Addresses

You should add host addresses for systems that will communicate frequently with the system. You can:

• View the entries in the hosts table.
• Add an entry to the list of hosts.
• Modify the IP address of a host.
• Delete a host entry.

Configuring Hosts - Gaia Portal

To add a static host entry:

Step	Description
1	In the navigation tree, click Network Management > Hosts and DNS.
2	In the Hosts section, click Add.
3	Enter: Host Name - Must include only alphanumeric characters, dashes ('-'), and periods ('.'). Periods must be followed by a letter or a digit. The name may not end in a dash or a period. There is no default value. IPv4 address IPv6 address

To edit a static host entry:

Step	Description
1	In the navigation tree, click Network Management > Hosts and DNS.
2	In the Hosts section, select a host entry and click Edit.
3	Edit: Host Name IPv4 address IPv6 address

To delete a static host entry:

Step	Description
1	In the navigation tree, click Network Management > Hosts and DNS.
2	In the Hosts section, select a host entry and click Delete.

Configuring Hosts - Gaia Clish

Description

Add, edit, delete and show the name and IP addresses for hosts that will communicate frequently with the system.

Syntax

• To add a host name and its IP address:

  add host name <Name of Host> ipv4-address <IPv4 Address of Host> ipv6-address <IPv6 Address of Host>

• To edit the host name and its IP address:

  set host name <Name of Host> ipv4-address <IPv4 Address of Host> ipv6-address <IPv6 Address of Host>

• To delete a host name and its IP address:

  delete host name <Name of Host> {ipv4 | ipv6}

• To show the configured IP address for a specified host:

  show host name<SPACE><TAB>

  show host name <Name of Host> {ipv4 | ipv6}

• To show all configured IP addresses of all hosts:

  show host names [ipv4 | ipv6]

Important - After you add, configure, or delete features, run the save config command to save the settings permanently.

Parameters

Parameter	Description
name <Name of Host>	The name of a static host. Must include only alphanumeric characters, dashes ('-'), and periods ('.'). Periods must be followed by a letter or a digit. The name must not end in a dash or a period. There is no default value.
ipv4-address <IPv4 Address of Host>	The IPv4 address of the host.
ipv6-address <IPv6 Address of Host>	The IPv6 address of the host.