System Configuration

Before you can configure IPv6 addresses and IPv6 static routes on a Gaia Security Management Server or Security Gateway, you must:

1. Enable IPv6 support for the Gaia OS.
2. On the Security Management Server, install and enable an IPv6 license.
3. Create IPv6 objects in SmartConsole.
4. Create IPv6 Firewall rules in SmartConsole.

Configuring IPv6 Support - Gaia Portal

Step	Description
1	In the navigation tree, click System Management > System Configuration.
2	In the IPv6 Support area, click On.
3	Click Apply.
4	Confirm, when prompted to reboot.

After the reboot, you can configure IPv6 addresses and IPv6 static routes.

Configuring IPv6 Support - Gaia Clish

Description

Configure and show IPv6 support.

Syntax

• To configure IPv6 support:

  set ipv6-state {on | off}

• To show the state of IPv6 support:

  show ipv6-state

Important - After you add, configure, or delete features, run the save config command to save the settings permanently.

Parameters

Parameter	Description
on	Enables IPv6 support. This change requires reboot. After the reboot, you can configure IPv6 addresses and IPv6 static routes.
off	Disables IPv6 support. This change requires reboot.