Mobility Management Service V0
Use this window to change the name, comment and color, and see the UDP port number used by the GTP Mobility Management service, version 0.
|
Getting Here - Object Explorer > New > Service > GTP Service > GTP Mobility Management V0
|
Mobility Management Service Options
Mobility Management Service Options for Version 0
What background information do I need to know?
The Mobility Management messages are control plane messages sent between SGSNs at the GPRS Attach and Inter SGSN Routing Update procedures, as defined in GSM 03.60 and 04.08.
These GTP signalling message types match Mobility Management Service Version 0:
- Identification Request
- Identification Response
- SGSN Context Request
- SGSN Context Response
- SGSN Context Acknowledge
To enable both version 0 and 1 of Mobility Management between SGSNs, create a Firewall Rule like this:
Source
|
Destination
|
Service
|
Action
|
Local SGSNs
|
Local SGSNs
|
gtp_mm_v0_default gtp_mm_v1_default
|
Accept
|
Mobility Management Service Options for Versions 1 and 2
Version 2 is available from R77.30, with the R77.30 Add-on installed.
The Mobility Management messages are the control plane messages that are sent between SGSNs at the GPRS Attach and Inter SGSN Routing Update procedures, as defined in 3GPP TS 23.060 and 3GPP TS 24.008.
These GTP signaling message types match versions 1 and 2:
- Identification Request
- Identification Response
- SGSN Context Request
- SGSN Context Response
- SGSN Context Acknowledge
- Forward Relocation Request
- Forward Relocation Response
- Forward Relocation Complete
- Relocation Cancel Response
- Forward Relocation Complete Acknowledge
- Forward SRNS Context Acknowledge
- Forward SRNS Context
To enable version 0 and 1 or 2 of Mobility Management between SGSNs, create a Firewall Rule similar to this:
Source
|
Destination
|
Service
|
Action
|
Local SGSNs
|
Local SGSNs
|
gtp_mm_v0_default gtp_mm_v1_default
|
Accept
|