Using Threat Emulation with Security Gateways and VSX Gateways

These are the specifications for the Threat Emulation deployments:

• Threat Cloud - R77 (or higher) Security Gateways with Gaia or SecurePlatform (64 or 32-bit)
• R77.20 (or higher) VSX Gateways
• For Local or Remote emulation:

  Maximum size of file to send to emulation is: 100,000 KB

  Check Point Threat Emulation Private Cloud Appliance with R77 or higher on the Gaia operating system (64-bit only), and R77.20 or higher VSX Gateways (Remote emulation only)

  Make sure that:

  • Each Virtual System has access to the Remote gateway or to the cloud.
  • Each Virtual System Gateway has access to the Internet for updates from the Check Point Download Center.

Note - This release does not support:

• Active/Standby Bridge Mode
• Virtual System Load Sharing Security Clusters with more than two members.
• MTA

Proxy Settings

If applicable, configure proxy settings for the VSX Gateway (VS0) and Virtual System:

1. From the Network Object tree, double-click the VSX Gateway (VS0).
2. From the navigation tree, select Topology > Proxy.
3. Configure the proxy settings, and click OK.