|
|
|
Check Point 1400 appliances support the Check Point Software Blade architecture and provide independent modular security building blocks. You can quickly enable and configure the Software Blades to meet your specific security needs.
These appliances run an embedded version of the Gaia operating system. It includes core configuration elements such as clish interface, SNMPv2/3 and routing stack implementations. In addition to the Gaia features, Embedded Gaia contains support for built-in network switches, wireless networks, 4G/LTE Internet connectivity, multiple Internet connections (more than 2) in High Availability or Load Sharing mode, Policy Based Routing, and DDNS support. Quick deployment with USB and SD card is supported for all appliances. For more information, see the 1400 Security Gateway series product page.
This guide describes all aspects that apply to local management mode. For more information on central management, see the Check Point 1400 Centrally Managed Administration Guide.
Note - Some topics only apply to specific appliances or models.
Appliance |
Model |
Appliance Homepage |
|---|---|---|
1430/1450 |
Wired, WiFi, |
|
1470/1490 |
Wired, WiFi, |
For front and back panel details for each appliance, see the relevant Getting Started Guide.
Review these materials before doing the procedures in this guide:
See the R77.20.86 home page.
