|
|
|
Check Point 1100, 1200R, and 1400 appliances support the Check Point Software Blade architecture and provide independent, modular and centrally managed security building blocks. You can quickly enable and configure the Software Blades to meet your specific security needs.
These appliances run an embedded version of the Gaia operating system. It includes core configuration elements such as clish interface, SNMPv2/3 and routing stack implementations. In addition to the Gaia features, Embedded Gaia contains support for built-in network switches, wireless networks, 4G/LTE Internet connectivity, multiple Internet connections (more than 2) in High Availability or Load Sharing mode, Policy Based Routing, and DDNS support. Quick deployment with USB is supported for all appliances, and with SD card for the 1200R and 1400 appliances.
The Check Point 1200R appliance is a ruggedized appliance that delivers Next Generation Threat Prevention for critical infrastructure and industrial control systems. This solid-state appliance is specifically designed to secure SCADA (supervisory control and data acquisition) protocols and OT (operational technology) equipment that operates under harsh environmental conditions. It complies with industrial specifications IEEE 1613, IEC 61850-3, IEC 60068-2 for heat, vibration and immunity to electromagnetic interference (EMI).
This guide describes all aspects that apply to central management mode. For more information on central management, see the 1100/1200R/1400 Locally Managed Administration Guide.
Note - Some topics only apply to specific appliances or models.
Appliance |
Model |
Appliance Homepage |
|---|---|---|
1100 |
Wired, WiFi |
|
1200R |
Wired |
|
1430/1450 |
Wired, WiFi, |
|
1470/1490 |
Wired, WiFi, |
For front and back panel details for each appliance, see the relevant Getting Started Guide.
Review these materials before doing the procedures in this guide:
See the R77.20.75 home page.
