AC Power Supply Units (PSUs)

3 Field replaceable and hot swappable 90 VAC to 240 VAC Power Supply Units (PSUs) supply:

Each PSU is located on a tray that slides directly into the backplane.

The AC Power inlets are located in the rear of the Chassis. Each power supply has one power inlet.

Item	Description (AC Power Unit)
1	PSU fan
2	Latch for extracting and inserting the PSU.
3	AC Power Supply LED Green: AC Power is OK. OFF: AC power is OFF
4	DC Power Supply LED Green: DC Power is OK. Red: DC power failure
5	Hot Swap LED Green: Power Supply is OK. Blue: hot swap ready
6	Locking captive screw

Power Requirements:

Each PSU provides power at these values:

1500W at 220VAC
1200W at 110VAC

An empty Chassis requires 500W.
Each SGM requires 300W.
Each SSM requires 200W.

Important - One power supply cannot energize a fully loaded Chassis.
To calculate the recommended number of power supplies:

AC Power Cords

The supplied AC power cords are specific to the geographical region. These are some of the available power cords.

Region	PLUG	CONNECTOR	CABLE
EU	KC-015, 16A 250V ~	KC-003H, 10 A 250V~	H05RR-F,3G 0.75mm2
AUSTRALIA	KC-014, 10A 250V	KC-003H, 10 A 250V~	H05RR-F 3G 0.75mm2
UK	KC-039, 13A 250V~	KC-003H, 10 A 250V~	H05RR-F 3G 0.75mm2
JP	KC-001, 15A 125V	KC-003H, 15A 125V	VCTF 3G 2.0mm2
US	KC-001, 15A 125V	KC-003H, 15A 125V	SJT 14/3C 75ºC
CHINA	KC-017N, 10A 250V~	KC-003H, 10 A 250V~	H05RR-F 3G 0.7mm2