Item

Description

(1)

1 port for direct access through LAN

1 port for direct access through console (serial)

(2)

2 x 40GbE QSFP data ports.

Use a QSFP splitter to split each of the two QSFP ports to 4 x 10GbE.
When using a QSFP splitter the interface names are:

• SSM1 left QSFP port: eth1-09 to eth1-12
• SSM1 left QSFP port: eth1-13 to eth1-16
• SSM2 right QSFP port: eth2-09 to eth2-12
• SSM2 right QSFP port: eth2-13 to eth2-16

(3)

7 x 10GbE SFP+ data ports

Can use 1GbE or 10GbE transceivers

In SmartDashboard, define used interfaces as internal or external.

(4)

1 x 10 GbE SFP+ synchronization port

Use for connecting to and synchronizing with another 41000 Security System that functions as a high availability peer.

• 10 GbE SFP+ port
• Interface names are eth1-Sync for SSM1 and eth2-sync for SSM2.

(5)

2x 10GbE SFP+ management and logging ports.

• Connect these ports to the management/logging network. Security Management Server or dedicated logging servers should be accessible from these interfaces.

In the 41000 Security System initial setup program, these interfaces are labeled:

• SSM1: eth1-Mgmt1, eth1-Mgmt2
• SSM2: eth2-Mgmt1, eth2-Mgmt2

(6)

2 x 1GbE SFP management and logging ports.

Connect these ports to the management/logging network. Security Management Server or dedicated logging servers should be accessible from these interfaces.

In the 41000 Security System initial setup program, these interface are labeled

• SSM1: eth1-Mgmt3, eth1-Mgmt4
• SSM2: eth2-Mgmt3, eth2-Mgmt4