Monitoring Performance (asg perf)
Use this command to continuously monitor key performance indicators and load statistics. There are different commands for IPv4 and IPv6. You can show the performance statistics for IPv4 traffic, IPv6 traffic or for all traffic.
When you run asg perf, the statistics display shows on the screen. The display is automatically updated after a predefined interval (default = 10 seconds). To stop asg perf and return to the command line, press .
Syntax
asg perf -h
asg perf [-b <sgm_ids>] [-vs <vs_ids>] [-k] [-v] [-vv] [-p] [-4|-6] [-c]
asg perf [-b <sgm_ids>] [-vs <vs_ids>] [-k] [--peak_hist|--perf_hist] [-e] [--delay <seconds>]
Parameter
|
Description
|
-h
|
Shows command syntax with help
|
-b
<sgm_ids>
|
Works with SGMs and/or Chassis as specified by <sgm_ids>.
The <sgm_ids> can be:
- No <sgm
_ids> specified or all shows all SGMs and Chassis - One SGM
- A comma-separated list of SGMs (
1_1,1_4) - A range of SGMs (
1_1-1_4) - One Chassis (
Chassis1 or Chassis2) - The active Chassis (
chassis_active)
|
-vs <vs_ids>
|
For VSX Gateways only. Shows performance for Virtual Systems as specified by <vs_ids>.
The <vs_ids> can be:
- No <vs_ids> (default) - Shows the current Virtual System context.
- One Virtual System.
- A comma-separated list of Virtual Systems (1,2,4,5).
- A range of Virtual Systems (VS 3-5).
all - Shows all Virtual Systems.
Note: This parameter is only relevant in a VSX environment.
|
-v
|
Shows statistics per SGM.
|
-vv
|
Shows statistics per Virtual System.
|
-p
|
Show detailed statistics and traffic distribution between these paths on the Active Chassis:
- Acceleration path (Performance Pack).
- Medium path (PXL).
- Slow path (Firewall).
|
-4|-6
|
-4 shows IPv4 information only.
-6 shows IPv6 information only.
If no value is specified, the combined performance information for both IPv4 and IPv6 shows.
|
-c
|
Show percentages instead of absolute values.
|
-k
|
Show peak (maximum) system performance values.
|
--peak_hist
|
Creates an exportable text file that contains all data saved in the peak performance files. You must use this parameter together with -k.
|
--perf_hist
|
Creates exportable text files that contains all performance data saved in the history files. You must use this parameter together with -k.
|
-e
|
Reset peak values and delete all peaks files and system history files.
|
--delay <seconds>
|
Temporarily changes the update interval for the current asg perf session. Enter a delay value in seconds. Default = 10 seconds
|
Notes:
- The
-b <sgm_ids> and -vs <vs_vs_ids> parameters must written be at the beginning of the command string. If both parameters are used, -b <sgm_ids> must be written first. - When you run
asg perf, it continues to show performance information, which is automatically updated after a predefined period of time (default = 10 seconds). The command line is not available while asg perf is running. - If your 61000/41000 Security System is not configured for VSX, the VSX related commands are not available. They do not show when you run
asg perf -h.
|
|
