Open Frames Download Complete PDF Send Feedback Print This Page

Previous

Next

Showing SSM Traffic Statistics (asg_traffic_stats)

Use this command to show traffic statistics, in terms of throughput (Bits per second) and Packet rate (packets per second), for SSM ports during a specified time period.

Packet rate statistics are divided to four categories:

  • Unicast
  • Multicast
  • Broadcast
  • Total packets per second

Syntax

asg_traffic_stats {<ssm_id> | <if_name>} [delay]

Parameter

Description

<ssm_id>

SSM name (1-4)

Shows the traffic statistics for the specified SSM

<if_name>

The interface name: eth1-04 or eth1-Sync

Shows the total traffic statistics for a specified SSM

delay

Length of time, in seconds, that traffic statistics are collected (Default = 5 seconds).


Example - Traffic over one interface

# asg_traffic_stats eth1-04
Processing traffic statistics for 5 seconds...

eth1-04 statistics
---------------------
  Incoming traffic:
  ------------------
  Throughput: 164.9 Kbps
  Packet rate: [Total: 252 pps], [Unicast: 14 pps], [Multicast: 161 pps], [Broadcast: 76 pps]

  Outgoing traffic:
  ------------------
  Throughput: 4.0 Kbps
  Packet rate: [Total: 2 pps], [Unicast: 2 pps], [Multicast: 0 pps], [Broadcast: 0 pps]

Example - Traffic over one SSM

# asg_traffic_stats 1
Processing traffic statistics for 5 seconds...

Summary on SSM1
----------------
  Incoming traffic:
  ------------------
  Throughput: 319.1 Kbps
  Packet rate: [Total: 409 pps], [Unicast: 167 pps], [Multicast: 166 pps], [Broadcast: 75 pps]

  Outgoing traffic:
  ------------------
  Throughput: 408.2 Kbps
  Packet rate: [Total: 156 pps], [Unicast: 156 pps], [Multicast: 0 pps], [Broadcast: 0 pps]
 
Top of Page ©2014 Check Point Software Technologies Ltd. All rights reserved. Download Complete PDF Send Feedback Print