Licensing and Registration

The 61000 Security System has an initial 180 day evaluation license. After the evaluation license expires, you must register the Chassis and generate a license. The 61000 Security System supports central licensing. It is not necessary to use the IP address assigned to the 61000 Security System.

Each Chassis has its own license. If you have dual Chassis system, you must generate two licenses. The license key is the 61000 Security System Certificate Key (CK).

To license and register the 61000 Security System:

1. Open the User Center Registration page.
2. Search for the Certificate Key.
3. Generate a license based on the IP address of the SSM interface connected to your Security Management Server.

   Note - The 61000 Security System has a single Management IP address, in dual Chassis environments, the Active and Standby Chassis should be bound to the same IP address in the license. Generate two licenses and enter the same IP address in each license.

4. If you use the Central License:

   Generate the license with the Smart Center IP Address.

   Install the license with Smart Update.

   Initiate the install policy to push the license to all the other SGMs in the Chassis/Dual Chassis.

5. Install the license on the system.

   If you use the cplic command, run it from gclish so that it applies to all SGMs.